« previous next »
Pages: 1 ... 93 94 [95] 96 97 ... 99

Author Topic: 2012 PA Bow Trade - Works In Progress  (Read 483907 times)

0 Members and 3 Guests are viewing this topic.

Offline johnston

  • Member
  • Posts: 976
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1410 on: July 15, 2012, 09:41:07 pm »
Damn Katt what happened to your shop ? It looks all neat and, well, purty.

That sure looks like a decent bow ol' JohnK sent ya, full draw is killer.

Lane
Logged

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1411 on: July 15, 2012, 09:44:35 pm »
Sweet bend, Chuck. Someone ought to be proud to own that one, for sure!!


I got my #2 tillered out yesterday, did most of the sanding today and shot it about 100 times. I'm rounding off the handle tonight and putting on the tip overlays and a couple coats of shellac to seal it. Tomorrow I'll take of work and put a couple coats of poly and the handle so It can go out by Tue., the 17th deadline. This one shoots every bit as good as the first one. Osage and ipe are fine woods to work with and very forgiving.
« Last Edit: July 15, 2012, 10:04:33 pm by lesken2011 »
Logged
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA

Offline coaster500

  • Member
  • Posts: 1,741
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1412 on: July 15, 2012, 10:02:09 pm »
Great bow Katt!!!  Well done JohnK :)

Quote from: loefflerchuck on July 15, 2012, 09:34:18 pm
Just in time. Took my time getting started then broke #1. Got this one done though. Just under 60" ntn. True d bow. Pulls in the mid 40# range at 27". Had to work around a few knots. Rocky Mt juniper with elk sinew back, backed with lingcod skin. Sending it out tomorrow

That  looks like a bow that needs a California address :)  Sweeeeeeet bend !!!
Logged
Inspiration, information and instruction by the ton and it's free,,, such a deal :)

Offline bubby

  • Member
  • Posts: 11,054
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1413 on: July 15, 2012, 10:23:23 pm »
Quote from: coaster500 on July 15, 2012, 10:02:09 pm
Great bow Katt!!!  Well done JohnK :)

Quote from: loefflerchuck on July 15, 2012, 09:34:18 pm
Just in time. Took my time getting started then broke #1. Got this one done though. Just under 60" ntn. True d bow. Pulls in the mid 40# range at 27". Had to work around a few knots. Rocky Mt juniper with elk sinew back, backed with lingcod skin. Sending it out tomorrow

That  looks like a bow that needs a California address :)  Sweeeeeeet bend !!!
Yeah, but farther north than coaster is thinking >:D, Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline coaster500

  • Member
  • Posts: 1,741
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1414 on: July 16, 2012, 01:12:45 pm »
Just sayin those Ling skins might be more at home on the coast bubby???   >:D
Logged
Inspiration, information and instruction by the ton and it's free,,, such a deal :)

Offline John K

  • Member
  • Posts: 1,936
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1415 on: July 16, 2012, 09:29:27 pm »
Came home to find a large black tube on the porch, and instent  ;D came on my face !

I opened it up to find a fine Dee rawhide backed Hickory bow, made by Rick Wallace. It has a cool camo painting on the back.

Great bow Rick, i will shoot it this weekend for sure !  :)
Logged
The only way to fail is to never start !

Offline turtle

  • Member
  • Posts: 1,069
  • PA1007207
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1416 on: July 16, 2012, 09:33:08 pm »
Recieved a bow from alex b today. 68 1/2 t2t 46# @ 26" hickory with a touch character. Thanks alex im in love with it already. Ive only shot about about 2 dozen shots so far bcause its 96 degrees out. Grabed 2 arrows on my way out the door after opening it and it groups so tight it only took around 10 shots befor i ruined  one of them. I will try to post pictures tomorrow evening.
Logged
Steve Bennett

Offline sharpend60

  • Member
  • Posts: 355
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1417 on: July 17, 2012, 01:05:33 am »
Hey guys.
Ive got some pics of my trade bow.
I'm way behind schedule due to work out of state.

Dont worry! It's on its way!




Rawhide backed One Seed Juniper. 56" total (I think... I tend not to measure, weigh or over analyze my bows...)
Ive drawn it to 22(ish)" and it sure zips an arra!
Started dead flat and has taken just under 1/2" of set. Bends just a touch through the handle.
I just picked up some tip alignment issues, so a drawn pic is gonna have to wait.

Btw
Lower limb in photo is upper limb when bow is in hand.
Hence the slightly stiff limb on top in photo.
Logged

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1418 on: July 17, 2012, 09:22:34 am »
i don't have an pictures of the bow i sent but here's a video of it

http://www.youtube.com/watch?v=Sv8e9jDqtDo&list=LLLM39JqSg42n0pA3KXEgnbQ&feature=mh_lolz

noel
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline bubby

  • Member
  • Posts: 11,054
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1419 on: July 17, 2012, 03:15:23 pm »
nice bow Noel, i was suprized it was under 120#  >:D, Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1420 on: July 17, 2012, 03:16:30 pm »
i was tempted, but i don't want to injure my recipient hehe
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline tetaxidermy

  • Member
  • Posts: 217
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1421 on: July 17, 2012, 04:50:49 pm »
Here are some finished pics,going out Thursday morning. Black locust, 66'' ntn, 45lbs@28'', carp skins on back. Just have to put some silencers on and put in a tube, off to the new owner hope they like it.
Logged
"Andy Dufresne: Get busy living, or get busy dying."
The Shawshank Redemption

Offline coaster500

  • Member
  • Posts: 1,741
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1422 on: July 17, 2012, 05:19:06 pm »
Some super bows!!!

It's so cool to see the personal touches and styles from every different builder. No cookie cutter work here..... 

Great stuff :)
Logged
Inspiration, information and instruction by the ton and it's free,,, such a deal :)

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1423 on: July 17, 2012, 06:50:19 pm »
My wife just left with a long white tube headed to the shipping store!! The last few days have been kinda hairy around here trying to meet this deadline. Thank goodness I could take a couple of days off. This was my first trade to be involved in but I will definitely do it again. I think it brings out the best in me at least. I know I'm not the only one that wound up having to make multiple bows due to wood that wouldn't cooperate. I spent the majority of time on #1 which left very little time for the one that was sent which was actually #3. #2 didn't break, but some crystals appeared after a hundred shots, or so. I hope my recipient likes the bow I sent and I want to thank all of you for all your help and advice.
Logged
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA

Offline Weylin

  • Member
  • Posts: 2,296
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1424 on: July 18, 2012, 12:49:41 am »
(I already posted this in Gun Doc's thread but I thought I'd share it here too.)

Here are some pictures of me with my new, sweet bow. Congrats on BOM, Josh. You definitely got my vote!  ;D Oh, and I got out shooting yesterday and let me tell you this bow is a screamer.  >:D





Ronan is still working up to a 60# draw weight ;)


« Last Edit: July 18, 2012, 01:47:33 am by Weylin »
Logged
Pages: 1 ... 93 94 [95] 96 97 ... 99
« previous next »