Author Topic: Hickory Board Bow Thoughts?  (Read 12471 times)

0 Members and 1 Guest are viewing this topic.

Offline ionicmuffin

  • Member
  • Posts: 1,787
Re: Hickory Board Bow Thoughts?
« Reply #15 on: August 23, 2012, 02:11:35 am »
oh, and just to let you know, i didnt buy any boards mostly because the boards looked like they had taken a log and ripped it into a bunch of vertical boards, and so basically i would have a 10 in board with 2 in of usable material... PLUS they refused to rip it down to just the 2 in...meaning 50$ for that piece of crap.....not worth it to me.
Amo innectis arcus- I love crafting bows (latin)

Offline danlaw

  • Member
  • Posts: 110
Re: Hickory Board Bow Thoughts?
« Reply #16 on: August 23, 2012, 03:40:26 am »
Too bad. Hickory is great. You know, it doesn't matter what way the board is cut as long as the grain is straight. You can make a decent 45# bow with a 1x1" piece of quarter sawn. I just dropped one off for a buddy. It was 61" 40# 15/16 wide, 3/4 deep at the handle, 9/16 deep at the fade 1/4 at the tips (pointed with wrapped bowstring for nocks). It even had some runnout. You might want to rethink it - 10 staves is 5 bucks a piece. If I found a straight grain dimensional 1x10, or 2x10 for 50$ I 'd buy it now matter how it was cut.