« previous next »
Pages: [1]

Author Topic: Removing glue from bow back...  (Read 1545 times)

0 Members and 1 Guest are viewing this topic.

Offline ajooter

  • Member
  • Posts: 1,234
Removing glue from bow back...
« on: April 03, 2016, 09:04:43 pm »
I used Elmer's glue to seal a bow back up while seasoning.  What is the best way to get it off?  I tried some scolding hot water and a scrubby pad but I couldn't get everything out of all the grain.  What's the best way to get the glue off the back of the bow?
Thanks in advance for any help.
Logged

Offline ajooter

  • Member
  • Posts: 1,234
Re: Removing glue from bow back...
« Reply #1 on: April 03, 2016, 09:19:56 pm »
Also wondering about how the little glue that's left will affect finish application?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Removing glue from bow back...
« Reply #2 on: April 03, 2016, 10:58:15 pm »
Lightly scrape or sand.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Removing glue from bow back...
« Reply #3 on: April 04, 2016, 07:44:26 am »
I use my scraper to get 98% of it, then sand the rest off. It loads sandpaper up FAST, so get what you can with a steel tool of sorts.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline ajooter

  • Member
  • Posts: 1,234
Re: Removing glue from bow back...
« Reply #4 on: April 04, 2016, 07:51:51 am »
That's what I was thinking fellas ty for the reassurance.
Logged

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Removing glue from bow back...
« Reply #5 on: April 04, 2016, 10:03:59 am »
 Sand paper
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING
Pages: [1]
« previous next »