« previous next »
Pages: [1]

Author Topic: My first bow  (Read 2691 times)

0 Members and 1 Guest are viewing this topic.

Offline 89JeepYJ

  • Member
  • Posts: 28
My first bow
« on: April 03, 2016, 12:24:57 am »
At last I finally (sorta) finished my first bow. I can tell it needs some more work, but it's almost done. It's bush honeysuckle which I have read makes a decent bow. It's approximately 52" nock to nock and it has a natural deflex in it when unstrung. I've drawn it over a dozen times and so far it's holding up. I just need to make a proper string for it after I get some stringmaker's wax. To top it all off, I've got some honeysuckle arrow shafts to go with it.

It's been a satisfying learning experience for me.

« Last Edit: April 03, 2016, 12:28:16 am by 89JeepYJ »
Logged

Offline tattoo dave

  • Member
  • Posts: 1,545
  • Rockford, MI
Re: My first bow
« Reply #1 on: April 03, 2016, 08:14:39 am »
Looks good for a number one. You're right it does need a little work. I think you got a little bit of a hinge working, about mid top limb. Doing good so far, be patient. I'm sure others will chime in with some input. Welcome to PA.

Tattoo Dave
Logged
Rockford, MI

blackhawk

  • Guest
Re: My first bow
« Reply #2 on: April 03, 2016, 08:18:58 am »
Good first attempt so far...im sure you learned a lot from it...try and fix the tiller on it as best ya can,and then go make another!!!  ;)   
Logged

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: My first bow
« Reply #3 on: April 03, 2016, 08:40:51 am »
The bottom limb looks really good. If you could get that top limb area from the fade and up about a foot bending a bit more I think you will have it.
Logged

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: My first bow
« Reply #4 on: April 03, 2016, 08:24:27 pm »
nice for your first,, keep at it,,and have fun :)
Logged

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: My first bow
« Reply #5 on: April 03, 2016, 08:52:17 pm »
Nice 1st bow but it does need to bend more off the upper handle putting a lot of stress on that hinge area. Might have to lose some draw wieght but it will probably save your bow.
Logged
A hot cup of coffee and a beautiful sunrise

Offline Stick Bender

  • Member
  • Posts: 2,003
Re: My first bow
« Reply #6 on: April 04, 2016, 04:26:43 am »
Looks better then my first a little more tweeking & you will have a nice bow
Logged
If you fear failure you will never Try !

Offline Will B

  • Member
  • Posts: 1,022
Re: My first bow
« Reply #7 on: April 04, 2016, 08:01:06 am »
Nice 1st bow.  Welcome to the addiction.
Logged

Offline 89JeepYJ

  • Member
  • Posts: 28
Re: My first bow
« Reply #8 on: April 04, 2016, 02:18:11 pm »
Don't let the side view fool you though, it's oddly shaped, but I got the nocks lined up best I could.



I ordered a bow scale so I could find out what the draw weight is, but it feels like it's 50-55# at about 26in draw. Maybe less than that.
Logged
Pages: [1]
« previous next »