« previous next »
Pages: [1]

Author Topic: Will this work?  (Read 3912 times)

0 Members and 1 Guest are viewing this topic.

Offline Blob

  • Member
  • Posts: 91
Will this work?
« on: December 01, 2014, 08:30:54 am »
So I was finally able to get my hands on some Osage.  I have 2 pieces just like this, the other is an inch or so wider than this one.











The one knot that might be an issue.








Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,206
  • if you have to ask you wouldn't understand ,Tenn.
Re: Will this work?
« Reply #1 on: December 01, 2014, 08:39:51 am »
That should make just about anything you want. :) Nice looking piece. :)
  Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Will this work?
« Reply #2 on: December 01, 2014, 09:31:14 am »
It is a little short but should make a nice bow.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: Will this work?
« Reply #3 on: December 01, 2014, 09:44:42 am »
What draw length are you shooting for.  I have never worked osage but that loos like a great piece.
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Will this work?
« Reply #4 on: December 01, 2014, 10:10:04 am »
Looks like it would make a nice bendy bow.   You might want to get that raccoon out of your workshop.
Logged
I started out with nothin' and I still got most of it left

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Will this work?
« Reply #5 on: December 01, 2014, 11:25:30 am »
no that wont work,, send it to me for proper recycling  :)
Logged

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: Will this work?
« Reply #6 on: December 01, 2014, 12:49:35 pm »
That won't work at all, too short to narrow, rings are bad and it ain't yeller enough! Send it to me, I have a wood stretcher, and a paint brush. Maybe I can make something with it. Patrick
Logged
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline bow101

  • Member
  • Posts: 2,235
Re: Will this work?
« Reply #7 on: December 01, 2014, 02:21:03 pm »
You can always go to the lumber yard and buy straight goods.    ;)
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline Blob

  • Member
  • Posts: 91
Re: Will this work?
« Reply #8 on: December 01, 2014, 02:50:38 pm »
Thanks guys...if I can make this work it will be my first "true" self bow.

Quote from: IdahoMatt on December 01, 2014, 09:44:42 am
What draw length are you shooting for.  I have never worked osage but that loos like a great piece.

26" is what I am looking for

Quote from: bradsmith2010 on December 01, 2014, 11:25:30 am
no that wont work,, send it to me for proper recycling  :)

It's on its way...hold your breath till it gets there...

Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Will this work?
« Reply #9 on: December 01, 2014, 03:08:08 pm »
Just take it slow, exercise the bow as you remove wood and it begins to bend, take it slow, never pull it over the intended weight and take it slow.  ;) Post pics of your progress and any problems you may run into and we'll keep you on the right track.
  That's a nice piece of osage and it should make you a nice little bow.   8)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Blob

  • Member
  • Posts: 91
Re: Will this work?
« Reply #10 on: December 01, 2014, 07:48:01 pm »
Couple questions...

Stiff or Bendy handle?

Flipped tips or not?

Sapwood on or off?

At which point (or percentage) of the limb should I start tapering toward the tips?  Is it like a board bow where a pyramid style seems to be ideal?

It's probably going to be a week or so before I get started on this one.  I have to finish the BBI that I am currently working on.



Logged

Offline JonW

  • Member
  • Posts: 1,906
Re: Will this work?
« Reply #11 on: December 01, 2014, 08:27:28 pm »
Use the full 57" of length and make a bendy handle bow. Yes flip the tips. Chase down to the first dark ring under the sapwood.
Logged

Offline JW_Halverson

  • Member
  • Posts: 11,925
Re: Will this work?
« Reply #12 on: December 01, 2014, 09:23:36 pm »
Absolutely likeable stick of wood.  I have done with worse!

+1 on the bendy with flipped tips.  You can also make the bow with a grip area just barely bending, so the side view of the bow when bent is slightly eliptical instead of circular. 

Those first yellow rings will do just fine.  If you find that you have hit a full ring, but it is partially sapwood and partially heartwood, don't worry about it.  Practice chasing rings in the sapwood and by the time yoou get to the heartwood, it will be a lead pipe cinch!
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Will this work?
« Reply #13 on: December 02, 2014, 10:26:26 am »
Looks like a great piece of osage.  I agree with the others, bendy handle and flipped tips.
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: Will this work?
« Reply #14 on: December 02, 2014, 10:36:22 am »
I'd remove the bark and sapwood, chase a decent ring, profile it, get it tillered to a low brace height (moving maybe 20") and then recurve the tips. I'd leave a short 4-5" non-bending handle. JMO of course!
Logged
Pages: [1]
« previous next »