« previous next »
Pages: [1] 2

Author Topic: Yew board bow question  (Read 5003 times)

0 Members and 1 Guest are viewing this topic.

Offline MotherGoose

  • Member
  • Posts: 12
Yew board bow question
« on: May 21, 2014, 09:50:29 pm »
Hello newb question... I was given a milled yew board... 77 inches long 2.75 wide and an inch thick...the grain is at an angle on the end and has no sap wood. Is this possible to make a flat bow with?
Logged

Offline Weylin

  • Member
  • Posts: 2,296
Re: Yew board bow question
« Reply #1 on: May 21, 2014, 09:54:31 pm »
got any pictures? If it was mine I'd back it with bamboo.
Logged

Offline MotherGoose

  • Member
  • Posts: 12
Re: Yew board bow question
« Reply #2 on: May 21, 2014, 10:08:09 pm »
Pic
Logged

Offline MotherGoose

  • Member
  • Posts: 12
Re: Yew board bow question
« Reply #3 on: May 21, 2014, 10:09:09 pm »
Oops too small...I'm having a hard time getting pictures to post
Logged

Offline Crogacht

  • Member
  • Posts: 455
Re: Yew board bow question
« Reply #4 on: May 21, 2014, 10:10:50 pm »
What are you taking the photo with? If you can get a decent quality image and resize it to just under 200kb in size that should be big enough to see the grain and small enough to upload from your pc.
Logged

Offline MotherGoose

  • Member
  • Posts: 12
Re: Yew board bow question
« Reply #5 on: May 21, 2014, 10:15:03 pm »
Using my iPad. Can't seem to figure out how to resize correctly
Logged

Offline Crogacht

  • Member
  • Posts: 455
Re: Yew board bow question
« Reply #6 on: May 21, 2014, 10:17:42 pm »
iPad. Hmmm. I use Paint to do it, but I believe there is an app you can download which will resize pictures for you. If it gives you a file size option, choose just under 200kb, if it goes by pixels, start off with 800x600 and see if that gives you a file under 200kb. The actual imagesize vs. size of file will vary between photos.
Logged

Offline MotherGoose

  • Member
  • Posts: 12
Re: Yew board bow question
« Reply #7 on: May 21, 2014, 10:18:15 pm »
Pic
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Yew board bow question
« Reply #8 on: May 21, 2014, 11:18:43 pm »
hickory is another backing option.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline MotherGoose

  • Member
  • Posts: 12
Re: Yew board bow question
« Reply #9 on: May 21, 2014, 11:28:33 pm »
So if I back it do I have to worry about chasing a grain? It is at a 45 degree angle as it sits now...
Logged

Offline BL

  • Member
  • Posts: 71
Re: Yew board bow question
« Reply #10 on: May 22, 2014, 12:01:19 am »
It's angled on the end, but how does the grain look running lengthwise down the board?
Logged

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: Yew board bow question
« Reply #11 on: May 22, 2014, 12:03:59 am »
Looks fine to me. Put some bamboo of there and you won't be sorry :)
Logged
Clatskanie, Oregon

Offline MotherGoose

  • Member
  • Posts: 12
Re: Yew board bow question
« Reply #12 on: May 22, 2014, 01:35:45 am »
Pic
Logged

Offline medicinewheel

  • Member
  • Posts: 3,629
Re: Yew board bow question
« Reply #13 on: May 22, 2014, 02:11:13 am »
Looks like a damn nice yew board to me!
I would split it lengthwise, flip one slat, glue it back together and back it with boo or hick for a tri-lam.
Logged
Frank from Germany...

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: Yew board bow question
« Reply #14 on: May 22, 2014, 06:33:31 am »
nice board. bamboo would look good on it. if theres any wood that can handle grain violation its yew
Logged
Pages: [1] 2
« previous next »