« previous next »
Pages: [1] 2 3 ... 9

Author Topic: First attempt at a Sinew Back Osage Recurve (progress pics posted)  (Read 34179 times)

0 Members and 1 Guest are viewing this topic.

Offline Danzn Bar

  • Member
  • Posts: 4,166
First attempt at a Sinew Back Osage Recurve (progress pics posted)
« on: December 23, 2013, 09:00:12 pm »
Got a few pictures of my progress.   Thanks again to Osage Outlaw (Clint) for the sinew.    :) ;)   Hope to be using it in the next few weeks.
Took a couple of pictures of my caul/form, tip steaming set up and the bow to this point with the (Pearl like) recurves.

Wouldn't recommend PVC for a steaming tube, it's gets a little soft @ 212 deg. F  :-[ :-[   :laugh:

Of course I'll be shorting those tips up a bit.  Stave was a little longer than needed but it really helps with steaming bending the tips.
I'll post my progress

Comments welcome,
Thanks for looking,
DBar

« Last Edit: January 26, 2014, 12:02:31 pm by Danzn Bar »
Logged
Integrity is doing the right thing when no one is looking

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: First attemptat a Sinew Back Osage Recurve
« Reply #1 on: December 23, 2013, 09:12:09 pm »
Wowza! That looks sweet so far
Logged
Nothing ventured nothing gained

Offline DLH

  • Member
  • Posts: 400
Re: First attemptat a Sinew Back Osage Recurve
« Reply #2 on: December 23, 2013, 09:16:34 pm »
Wow bill looking good I'm pitching a tent over here >:D
Logged

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: First attemptat a Sinew Back Osage Recurve
« Reply #3 on: December 23, 2013, 09:24:24 pm »
Thanks, Blaflair

DLH...........Did you finally get married????  >:D :laugh: :laugh: ;)
Logged
Integrity is doing the right thing when no one is looking

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: First attempt at a Sinew Back Osage Recurve
« Reply #4 on: December 23, 2013, 09:28:04 pm »
This is going to be a good one Bill.  Those are some wicked curves on that thing.
Logged
I started out with nothin' and I still got most of it left

Offline Badger

  • Member
  • Posts: 8,124
Re: First attempt at a Sinew Back Osage Recurve
« Reply #5 on: December 23, 2013, 09:31:24 pm »
  What is the radius on your curve?
Logged

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: First attempt at a Sinew Back Osage Recurve
« Reply #6 on: December 23, 2013, 09:33:14 pm »
Let's hope so Clint,  Pat B inspired me to try my hand at a short recurve.  This one is not going to be as short as his, looking at about 60"- 62" for a 28" draw.
Thanks again,
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: First attempt at a Sinew Back Osage Recurve
« Reply #7 on: December 23, 2013, 09:37:33 pm »
Quote from: Badger on December 23, 2013, 09:31:24 pm
  What is the radius on your curve?

2 3/4" R.................Badger
Logged
Integrity is doing the right thing when no one is looking

Offline DLH

  • Member
  • Posts: 400
Re: First attempt at a Sinew Back Osage Recurve
« Reply #8 on: December 23, 2013, 10:38:58 pm »
Nope not yet bill this coming Saturday. I assume this bow will be for bear season 2014?
Logged

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: First attempt at a Sinew Back Osage Recurve
« Reply #9 on: December 23, 2013, 10:45:53 pm »
That's looking great.  Can't wait to see the progress.  I love these buildalongs. 
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: First attempt at a Sinew Back Osage Recurve
« Reply #10 on: December 24, 2013, 12:37:20 am »
Nice hooks on this one for sure, D. Looking forward to the process.   8)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline dwardo

  • Member
  • Posts: 1,456
Re: First attempt at a Sinew Back Osage Recurve
« Reply #11 on: December 24, 2013, 05:59:24 am »
More of us should post in progress pictures as they pint a thousand words.
That's looking like a belter  8)
Logged

Offline hedgeapple

  • Member
  • Posts: 1,835
Re: First attempt at a Sinew Back Osage Recurve
« Reply #12 on: December 24, 2013, 06:28:55 am »
I'll be keeping an eye on this one.  Looking good.
Logged
Dave   Richmond, KY
26" draw

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: First attempt at a Sinew Back Osage Recurve
« Reply #13 on: December 24, 2013, 07:05:59 am »
Thanks Idaho...me too
Pat ....Progress will be a little slow around the Holidays,  Might get back to it this weekend.  Thanks for posting your build-a-long I learned a lot.
dwardo, I like to see those types of posts also.....hope my pictures get better than in the past, have patience with me.
Hedge, hope to at least be shooting it in by Moontree this year.
Appreciate the comments all,
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline TRACY

  • Member
  • Posts: 4,523
Re: First attempt at a Sinew Back Osage Recurve
« Reply #14 on: December 24, 2013, 07:09:33 am »
Bring it to the shoot on the fourth so we can see those curves up close. Looks real good Bill!
Logged
It is what it is - make the most of it!    PN500956
Pages: [1] 2 3 ... 9
« previous next »