« previous next »
Pages: [1]

Author Topic: 1st handle splice  (Read 1362 times)

0 Members and 1 Guest are viewing this topic.

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
1st handle splice
« on: August 12, 2012, 12:59:58 pm »
I just did my 1st handle splice. After researching, I decided to do a z-splice since I could cut both pieces at the same time (If you saw my band saw skills, you would know why). Anyway the wood is hard maple and splice fits together quite nicely but you can obviously see light through it. The handle is a full inch thick, but will also have small rounded pieces on front and back. I have read alot about the lack of gap filling capability of the pvc glues and was entertaining the idea of using knox hide glue for the splice. I do have some weldwood plastic cement and 3500 psi epoxy, though. Which do you think would be better? My concern about the hide glue is moisture from sweaty hands combined with shooting on a hot day.
Logged
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: 1st handle splice
« Reply #1 on: August 12, 2012, 01:08:24 pm »
If you heat your splices up with a heat gun or other heat source and clamp everything together without glue you will get a much better fit after everything cools off.
Logged

Offline RobWiden

  • Member
  • Posts: 99
Re: 1st handle splice
« Reply #2 on: August 12, 2012, 01:14:33 pm »
    Hide glue won't fill gaps. Sounds to me like you'd be best off using the epoxy, along with Eric's advice.
Logged
If I knew what I was doing, I'd probably be bored with it, and I wouldn't be here.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: 1st handle splice
« Reply #3 on: August 12, 2012, 01:21:25 pm »
Use Eric's suggestion. With good, even clamping this method will give you pretty good, closely matched glueing surfaces.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Re: 1st handle splice
« Reply #4 on: August 12, 2012, 03:13:15 pm »
Do I need to treat it like I am bending wood? (lubricate with cooking oil or something white toasting), or just heat it up??
Logged
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: 1st handle splice
« Reply #5 on: August 12, 2012, 03:34:29 pm »
NO OIL!!!!  That would prevent anything from sticking the two of them together.

If you have ever dried down a batch of rehydrated hide glue, you would see that it reduces in volume even worse than PVA glues like the TiteBond line.  If you had perfect wood to wood fit, hide glue might be find, but for any gap filling, forget it!

Post pics, win or lose, we can all learn from what you got going on!
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Re: 1st handle splice
« Reply #6 on: August 12, 2012, 03:43:08 pm »
Duh. I guess I posted that before I really thought about it. Thanks for the info about the hide glue. It looks like epoxy it is!!
Logged
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA
Pages: [1]
« previous next »