« previous next »
Pages: [1]

Author Topic: Smoker or Bow???  (Read 2447 times)

0 Members and 1 Guest are viewing this topic.

Offline coaster500

  • Member
  • Posts: 1,741
Smoker or Bow???
« on: August 11, 2012, 11:48:05 am »
I was roughing out a Mulberry stave and got a pretty nice candidate in the top half for a bow. When I was finished with the top I looked at the belly split and decide to see if there was a bow in it. Chased the back as far as I could and was left with a narrow piece that will need an ELB type cross section but I'm not sure it will make it to a bow. I've worked with some cracks before but this one has a bunch. The worst is 10"s from the tip on on end and shows on the top and side of the limb. If I continue I will be backing it with rawhide....  it's that side crack that worrys me????

Question smoker or bow?????

http://s28.photobucket.com/albums/c210/coaster500/Stave%20Master/?albumview=slideshow




Logged
Inspiration, information and instruction by the ton and it's free,,, such a deal :)

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Smoker or Bow???
« Reply #1 on: August 11, 2012, 11:53:49 am »
Kip, that crack seems to run off the limb. You could soak it with super glue and add a wrap where it comes close to the edge.  It should make a light weight bow and maybe heavier. You'll only know if you try!  ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Smoker or Bow???
« Reply #2 on: August 11, 2012, 02:01:37 pm »
Or wrap rawhide over both edges encasing the entire back and sides. I have done it with heavier 50-55# bows and it worked well. I would still super glue the crack prior to adding rawhide.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Smoker or Bow???
« Reply #3 on: August 11, 2012, 03:16:24 pm »
+1 on PD's advice. 

Get the thinnest, runniest, crack penetrating superglue you can find.  Some of that stuff will wick deep into cracks.  Several light applications seems to work better than one big soaker. 

Antelope rawhide is great in this situation where you add as little weigh as possible but still plenty of strength. 

Best of luck to you!
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Smoker or Bow???
« Reply #4 on: August 11, 2012, 03:23:28 pm »
Roo hide is great to, very thin and opaque. Just did a locust bow with it a few weeks back.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline coaster500

  • Member
  • Posts: 1,741
Re: Smoker or Bow???
« Reply #5 on: August 11, 2012, 03:38:25 pm »
Thanks guys....  crazy glue is done

Got goat but Roo hide???
Logged
Inspiration, information and instruction by the ton and it's free,,, such a deal :)

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Smoker or Bow???
« Reply #6 on: August 11, 2012, 03:39:24 pm »
I ate kangaroo once.  Tastes great, but it makes me jumpy. 
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Re: Smoker or Bow???
« Reply #7 on: August 11, 2012, 04:07:13 pm »
JW definitely took his "funny" pill today.  ::)
Logged
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Smoker or Bow???
« Reply #8 on: August 11, 2012, 04:36:08 pm »
Swore off those funny pills long ago.   ;D
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Smoker or Bow???
« Reply #9 on: August 11, 2012, 04:58:20 pm »
Goat rawhide is excellent too. Thin and strong!  ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline DarkSoul

  • Member
  • Posts: 1,315
    • Orion Bows
Re: Smoker or Bow???
« Reply #10 on: August 11, 2012, 06:54:55 pm »
I can't make a judgement based on those crappy pictures. I can see a faint grey line, but it that's the crack?? I can't tell. How does it run? How deep does it go? Does it wander off the side?
Take the bow outside, in bright daylight. Lay the bow down (not hovering in mid-air). Set the camera on "macro"-mode, which is the button with the little flower icon. The report some pics and we might be able to see the cracks. But it remains difficult for us to get a 3D image of how the crack exactly runs.

A superglue soak, wrap with thread/sinew and a backing might save the bow if it's a smallish crack that doesn't wander off the side too much.
Logged
"Sonuit contento nervus ab arcu."
Ovid, Metamorphoses VI-286

Offline coaster500

  • Member
  • Posts: 1,741
Re: Smoker or Bow???
« Reply #11 on: August 11, 2012, 07:44:42 pm »
Sorry for the bad pics but I took them in a hurry this morning before work... I'm at work now but the top picture shows the crack on the back of the bow and yes it does go to and thru the edge. The bottom picture shows the crack on the side of the bow. Yes it goes thru the edge on the side.
Logged
Inspiration, information and instruction by the ton and it's free,,, such a deal :)

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Smoker or Bow???
« Reply #12 on: August 12, 2012, 03:30:18 pm »
Talk about irresponsible behavior.  The guy has a serious problem with a bow and blithely goes off to work!  Dude!  Priorities!
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline coaster500

  • Member
  • Posts: 1,741
Re: Smoker or Bow???
« Reply #13 on: August 12, 2012, 05:03:37 pm »
 :laugh: :laugh: :laugh:
Logged
Inspiration, information and instruction by the ton and it's free,,, such a deal :)
Pages: [1]
« previous next »