« previous next »
Pages: [1] 2

Author Topic: Help... Need Wood I.D.  (Read 3983 times)

0 Members and 1 Guest are viewing this topic.

Offline BowJunkie

  • Member
  • Posts: 283
Help... Need Wood I.D.
« on: April 05, 2011, 02:08:51 pm »
Got my hands on some free wood. Need help with identifying it.
Also does it have potential as a bow wood?
The bark just peels right off as soon as it is cut.
Logged
Johnny
in Texas

Offline Elktracker

  • Member
  • Posts: 1,964
  • Josh
Re: Help... Need Wood I.D.
« Reply #1 on: April 05, 2011, 02:27:59 pm »
Does it peel off length wise or around the tree? I am bad at IDing trees but if it peels off around the tree it might be cherry?

Josh
Logged
my friends think my shops a mess, my wife thinks I have too much bow wood, my neighbors think im redneck white trash and they may all be right on the money!!

Josh Vance  Netarts OR. (Tillamook)

Offline Blacktail

  • Member
  • Posts: 1,432
Re: Help... Need Wood I.D.
« Reply #2 on: April 05, 2011, 02:33:22 pm »
i think josh is right...maybe choke cherry..
Logged

Offline BowJunkie

  • Member
  • Posts: 283
Re: Help... Need Wood I.D.
« Reply #3 on: April 05, 2011, 02:34:23 pm »
This stuff peels right up the length of the tree.
Not around.
Logged
Johnny
in Texas

Offline BowJunkie

  • Member
  • Posts: 283
Re: Help... Need Wood I.D.
« Reply #4 on: April 05, 2011, 02:37:47 pm »
Here is a piece I peeled earlier
Logged
Johnny
in Texas

Offline Elktracker

  • Member
  • Posts: 1,964
  • Josh
Re: Help... Need Wood I.D.
« Reply #5 on: April 05, 2011, 02:46:15 pm »
 ??? someone will get on here and be able to help ya out ;)
Logged
my friends think my shops a mess, my wife thinks I have too much bow wood, my neighbors think im redneck white trash and they may all be right on the money!!

Josh Vance  Netarts OR. (Tillamook)

Offline lowell

  • Member
  • Posts: 939
Re: Help... Need Wood I.D.
« Reply #6 on: April 05, 2011, 02:49:21 pm »
I don't think cherry...what part of the country???  Doesnt look like anything from my area.

  My first thought is young hackberry but really don't know!!
Logged
My son says I shoot a stick with a stick!!

Offline BowJunkie

  • Member
  • Posts: 283
Re: Help... Need Wood I.D.
« Reply #7 on: April 05, 2011, 02:52:03 pm »
Texas, I was leaning along the lines of hackberry,,, but after more research it looks more like sugarberry????
Maybe I'm wrong
Logged
Johnny
in Texas

Offline criveraville

  • Member
  • Posts: 3,210
  • Psalm 127:4
Re: Help... Need Wood I.D.
« Reply #8 on: April 05, 2011, 03:03:17 pm »
looks like hackberry to me
Logged
I was HECHO EN MEXICO, but assembled in Texas and I'm Texican as the day is long...  Psalm 127:4 As arrows are in the hand of a mighty man; so are children of the youth.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Help... Need Wood I.D.
« Reply #9 on: April 05, 2011, 03:50:53 pm »
My first thought was mulberry. Was there any white sap when you cut it?
  The leaf doesn't look like a cherry or hackberry(sugarberry). As far as I know hackberry and sugarberry are the same.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline BowJunkie

  • Member
  • Posts: 283
Re: Help... Need Wood I.D.
« Reply #10 on: April 05, 2011, 05:01:34 pm »
Yes it does have white sap. I just now laid out a profile on it and carved it out with a draw knife.
Also I left the bark on the back, and I am about to seal it with polyurethane.
Does that sound about right?
Logged
Johnny
in Texas

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Help... Need Wood I.D.
« Reply #11 on: April 05, 2011, 05:09:19 pm »
It is mulberry!  You should be fine leaving the bark on for a while. Do seal the ends though.  With the belly cut down the moisture can escape there. You might want to clamp or tie it to a form to prevent twisting. You can add a little backset to it too.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline BowJunkie

  • Member
  • Posts: 283
Re: Help... Need Wood I.D.
« Reply #12 on: April 05, 2011, 05:14:56 pm »
Great information Pat. Thanks for the advice.
This stave is about 3 inches thick.
How long do you think it should cure before I Start to work on it?
Keep in mind, I am in Texas and the average temp is about 85's lately.
Logged
Johnny
in Texas

Offline Elktracker

  • Member
  • Posts: 1,964
  • Josh
Re: Help... Need Wood I.D.
« Reply #13 on: April 05, 2011, 05:20:23 pm »
I bought a 12 dollar cooking scale at fred meyer works good to figure out when your wood has stopped loseing weight, for me here in Oregon its very humid but with most white woods I get them down to about the size you have there then after about a month I reduce it further down closer to size wait a couple weeks then I take it down to floor tiller and let it loose the rest of the moisture it will lose, usually takes about 3 months.

Josh
« Last Edit: April 05, 2011, 05:25:13 pm by Elktracker »
Logged
my friends think my shops a mess, my wife thinks I have too much bow wood, my neighbors think im redneck white trash and they may all be right on the money!!

Josh Vance  Netarts OR. (Tillamook)

Offline BowJunkie

  • Member
  • Posts: 283
Re: Help... Need Wood I.D.
« Reply #14 on: April 05, 2011, 05:39:40 pm »
Sounds Perfect. Maybe with any luck, I will have a serviceable bow ready for Deer Season in October.
Thank you so much for the guidance.
I'm sure I may need more in the future.
Logged
Johnny
in Texas
Pages: [1] 2
« previous next »