« previous next »
Pages: [1] 2 3

Author Topic: auction bow (finished)  (Read 9082 times)

0 Members and 1 Guest are viewing this topic.

Offline turtle

  • Member
  • Posts: 1,069
  • PA1007207
auction bow (finished)
« on: March 06, 2016, 04:04:29 pm »
Yesterday I was asked to make a bow for a benifit auction to help a man that was diagnosed with cancer. He was a good friend of my stepsons before my stepson passed so there was no way I was gonna refuse. I was asked by a couple of members in the open bow trade to keep my progress posted so I started this thread for it. Bow needs to be done by april 30th. I chased a ring on an osage stave yesterday and roughed out a bow only to find a couple of checks that were hidden. It will still make a nice bow but I decided to reject it for this project. Today I dug deeper into my stash and pulled out this belly split I had been saving for a special occasion.  It's 80in long by 5 1/2in wide by 5 1/2 deep.


I went ahead and took another belly split off and then split the top half to give me three staves to choose from.


I then chose the best looking one and chased a ring. It had a little damage in one spot left by a wedge when it was split the first time. But it all came out with only one ring removed.


I will try to get it layed out tonight so I can rough it to shape tomorrow.
« Last Edit: April 24, 2016, 08:30:29 am by turtle »
Logged
Steve Bennett

Offline half eye

  • Member
  • Posts: 3,300
Re: auction bow
« Reply #1 on: March 06, 2016, 04:09:17 pm »
That is a very clean looking stave sir....cant wait to see what you have in mind
rich
Logged

Offline hunterbob

  • Member
  • Posts: 890
Re: auction bow
« Reply #2 on: March 06, 2016, 04:36:01 pm »
Nice looking stave turtle.
Logged

Offline mwosborn

  • Member
  • Posts: 806
  • Mitch Osborn
Re: auction bow
« Reply #3 on: March 06, 2016, 05:22:46 pm »
That stave is a keeper.  Looking forward to progress.
Logged
Enjoy the hunt!  Mitch

Offline Aaron H

  • Member
  • Posts: 3,437
Re: auction bow
« Reply #4 on: March 06, 2016, 06:31:28 pm »
3 very nice staves
Logged

Offline turtle

  • Member
  • Posts: 1,069
  • PA1007207
Re: auction bow
« Reply #5 on: March 07, 2016, 05:22:41 pm »
Roughed it out today and got the limbs bending a few inches on the floorSo far its 68" long 4" handle 2" fades 1 1/2" wide first 4" then straight taper to 1/2" tips. I left handle full width for now.


« Last Edit: March 07, 2016, 07:20:11 pm by turtle »
Logged
Steve Bennett

Offline half eye

  • Member
  • Posts: 3,300
Re: auction bow
« Reply #6 on: March 07, 2016, 05:52:04 pm »
Man Steve, that is looking good. I'm curious if you are going to leave the small amount of character in it? or do you cook 'em on a caul so they are flat and straight? Aint none of my business just wanted to comment on how nice both the profiles are with some "wiggle".
rich
Logged

Offline turtle

  • Member
  • Posts: 1,069
  • PA1007207
Re: auction bow
« Reply #7 on: March 07, 2016, 07:15:49 pm »
Quote from: half eye on March 07, 2016, 05:52:04 pm
Man Steve, that is looking good. I'm curious if you are going to leave the small amount of character in it? or do you cook 'em on a caul so they are flat and straight? Aint none of my business just wanted to comment on how nice both the profiles are with some "wiggle".
rich

I rarely straighten side to side exept for string alignment.  So far alignment looks almost dead nuts so by leaving the handle wide for now I dont think any lateral adjustment will be need. I will put it on a caul though to remove some twist and add a little reflex. In the past I have had people unfamiliar with wooden bows be skeptical about twist and uneven side profiles. So since this will be auctioned off to who knows who I will try to eliminate what I think might cause skepticism. I dont think the front profile has enough wiggle to cause much skepticism so I will leave it. Might even look good with some skins on it.
« Last Edit: March 07, 2016, 07:22:53 pm by turtle »
Logged
Steve Bennett

Offline half eye

  • Member
  • Posts: 3,300
Re: auction bow
« Reply #8 on: March 07, 2016, 07:24:31 pm »
You are absolutely right about considering the end user.....Guess I got carried away with the looks of it as is......but you got to deal with the carbon fiber dudes for sure......ignore my ignorant question.

I still say good on ya for making the bow, sir
rich
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: auction bow
« Reply #9 on: March 08, 2016, 02:00:41 am »
Coming along nicely.
That's inside your new shop I presume, looks good  :)
Del
Logged
Health warning, these posts may contain traces of nut.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: auction bow
« Reply #10 on: March 08, 2016, 06:38:39 am »
That will be a special bow Steve. 
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Aaron H

  • Member
  • Posts: 3,437
Re: auction bow
« Reply #11 on: March 08, 2016, 06:42:44 am »
Very clean
Logged

Offline Selfbowman

  • Member
  • Posts: 3,161
Re: auction bow
« Reply #12 on: March 08, 2016, 10:49:06 am »
Looking good . Arvin
Logged
Well I'll say!!  Osage is king!!

Offline turtle

  • Member
  • Posts: 1,069
  • PA1007207
Re: auction bow
« Reply #13 on: March 08, 2016, 04:02:56 pm »
Put it on the caul this morning. Took out the twist and added a little reflex.


This afternoon I got it worked out to low brace. Apparently when I took out the twist it changed my string alignment. The string barely catches the edge of the full width handle so it looks like I'm gonna hafta tweak one limb a little. Will try to do that tomorrow and maybe get it out to full brace.
Logged
Steve Bennett

Offline ---GUTSHOT--->

  • Member
  • Posts: 1,310
Re: auction bow
« Reply #14 on: March 08, 2016, 05:07:49 pm »
Coming along nice Steve. Looks good
Logged
Pages: [1] 2 3
« previous next »