Author Topic: tip over lay question?  (Read 3557 times)

0 Members and 2 Guests are viewing this topic.

Offline bushboy

  • Member
  • Posts: 2,256
tip over lay question?
« on: February 18, 2013, 12:39:43 pm »
having mostly done self nocks and flat glue ons,am wondering what type of glue you good folks have used in the past with good results for angle glue ons?thx's  ???
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline Roy

  • Member
  • Posts: 1,079
Re: tip over lay question?
« Reply #1 on: February 18, 2013, 12:42:18 pm »
I use smooth on, but you will get many opinions on this. Lots of guys use super glue, or other two part epoxys.

gutpile

  • Guest
Re: tip over lay question?
« Reply #2 on: February 18, 2013, 12:44:30 pm »
gorilla glue has worked for me

Offline k-hat

  • Member
  • Posts: 1,058
Re: tip over lay question?
« Reply #3 on: February 18, 2013, 12:53:34 pm »
i've used TB2 and superglue.  Both hold fine, gotta be quick with cyano though.  I switched to cyano mainly because i didn't like the yellow glue i couldn't completely get rid of at the transition.  Course i may should have used more pressure to make a thinner glue line.

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: tip over lay question?
« Reply #4 on: February 18, 2013, 12:54:03 pm »
I've only done a few tip overlays of wood, horn, and ivory.  I used superglue on all of them.  I'll probably keep using it unless I have one fail. 
I started out with nothin' and I still got most of it left

Offline Gordon

  • Member
  • Posts: 3,299
Re: tip over lay question?
« Reply #5 on: February 18, 2013, 01:33:27 pm »
I use superglue and have never had a tip failure yet.
Gordon

Offline JonW

  • Member
  • Posts: 1,906
Re: tip over lay question?
« Reply #6 on: February 18, 2013, 01:58:12 pm »
I use the ultra high sofisticated space age J-B WELD. Fills gaps and when dry gives a laminated look.

Offline Weylin

  • Member
  • Posts: 2,296
Re: tip over lay question?
« Reply #7 on: February 18, 2013, 01:59:40 pm »
Superglue for me. I think a gel type works best or at least something fairly viscous.

Offline bubby

  • Member
  • Posts: 11,054
Re: tip over lay question?
« Reply #8 on: February 18, 2013, 02:16:53 pm »
tb2
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: tip over lay question?
« Reply #9 on: February 18, 2013, 03:08:52 pm »
Any of the TB glues, super glue or 2ton epoxy.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Stringman

  • Guest
Re: tip over lay question?
« Reply #10 on: February 18, 2013, 04:20:13 pm »
TBIII never had any failures and I can start (careful) shaping after about 4 hrs dry time.

Scott

Offline Carson (CMB)

  • Member
  • Posts: 2,319
Re: tip over lay question?
« Reply #11 on: February 18, 2013, 04:45:09 pm »
I like medium thickness super glue.  I have started shaping within 20 mins.
"The bow is the old first lyre,
the mono chord, the initial rune of fine art
The humanities grew out from archery as a flower from a seed
No sooner did the soft, sweet note of the bow-string charm the ear of genius than music was born, and from music came poetry and painting and..." Maurice Thompso

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: tip over lay question?
« Reply #12 on: February 18, 2013, 05:18:49 pm »
10minute epoxy

Offline Tom Leemans

  • Member
  • Posts: 524
Re: tip over lay question?
« Reply #13 on: February 18, 2013, 05:21:02 pm »
Loctite super glue gel

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: tip over lay question?
« Reply #14 on: February 18, 2013, 05:23:05 pm »
 
 
I like medium thickness super glue.  I have started shaping within 20 mins.

Likewise. I dunk mine in water and start much faster than slow poke Carson's 20 minutes.
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.