« previous next »
Pages: [1] 2

Author Topic: is it junk... Vine Maple crack  (Read 4603 times)

0 Members and 1 Guest are viewing this topic.

Offline coaster500

  • Member
  • Posts: 1,741
is it junk... Vine Maple crack
« on: March 22, 2012, 04:59:59 pm »
I was dry heating in some reflex and this was there when I removed it from the form. It does not go all the way through the limb and I filled it with crazy glue. I have some goat rawhide. Should I continue or scrap this one?



Logged
Inspiration, information and instruction by the ton and it's free,,, such a deal :)

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: is it junk... Vine Maple crack
« Reply #1 on: March 22, 2012, 05:07:22 pm »
You have super glued it. if you put goat over it, I would continue on with it. What are your target specs?
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline sharpend60

  • Member
  • Posts: 355
Re: is it junk... Vine Maple crack
« Reply #2 on: March 22, 2012, 05:08:05 pm »
Go for it.

I usually always try to work around such problems.
Its the best way to learn.

I was lookin trough a highly regarded bowyers personal collection, I noticed lots of wraps and similar decorations.
I asked what they were for and he said to hide mistakes.

In my mind thats what makes a true artist. Make the mistakes look intentional.

And if it blows up?
Just make another.
Logged

Offline coaster500

  • Member
  • Posts: 1,741
Re: is it junk... Vine Maple crack
« Reply #3 on: March 22, 2012, 05:12:29 pm »
Bevan it's was intended for a kids bow but now I'll be #45@26 or so and make another for the kid....  don't want it to go BOOM on a kid :(



sharpend60 if mistakes make an artist, then just call me Picasso :)
Logged
Inspiration, information and instruction by the ton and it's free,,, such a deal :)

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: is it junk... Vine Maple crack
« Reply #4 on: March 22, 2012, 05:15:37 pm »
Where the crack is located, I think you will be fine with goat over the top. That is pretty tuff stuff for as thin as it is.
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline coaster500

  • Member
  • Posts: 1,741
Re: is it junk... Vine Maple crack
« Reply #5 on: March 22, 2012, 05:39:02 pm »
Just got done Bevan...  rawhide is glued and wrapped like a Mummy??????  we'll see :)
Logged
Inspiration, information and instruction by the ton and it's free,,, such a deal :)

Offline coaster500

  • Member
  • Posts: 1,741
Re: is it junk... Vine Maple crack
« Reply #6 on: March 22, 2012, 05:47:08 pm »
Question how long do you leave the ace bandage on the bow before you remove it. The last one I did I left it on overnight and it was a bear to clean up!!!
Logged
Inspiration, information and instruction by the ton and it's free,,, such a deal :)

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: is it junk... Vine Maple crack
« Reply #7 on: March 22, 2012, 05:49:27 pm »
What glue you using? I usually do what you did, at least overnight.
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline Gordon

  • Member
  • Posts: 3,299
Re: is it junk... Vine Maple crack
« Reply #8 on: March 22, 2012, 05:51:28 pm »
If you put superglue in the crack and then clamp it tight I think there is a pretty good chance it won't cause any problems.
Logged
Gordon

Offline Gordon

  • Member
  • Posts: 3,299
Re: is it junk... Vine Maple crack
« Reply #9 on: March 22, 2012, 05:52:40 pm »
Oh nevermind, I see that you backed the bow with rawhide.
Logged
Gordon

Offline coaster500

  • Member
  • Posts: 1,741
Re: is it junk... Vine Maple crack
« Reply #10 on: March 22, 2012, 05:57:18 pm »
Thank you Gordon I used super glue first then backed it with rawhide.

I used TB111 Bevan...
Logged
Inspiration, information and instruction by the ton and it's free,,, such a deal :)

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: is it junk... Vine Maple crack
« Reply #11 on: March 22, 2012, 06:12:51 pm »
Only thing I did different was after the hide was on, wipped the edges to get any excess. In the future I suppose you could use the blue masking tape and cover the belly. That might help.
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: is it junk... Vine Maple crack
« Reply #12 on: March 22, 2012, 06:35:07 pm »
Was the wood dry? That looks like a check caused from the water escaping from the heat. Usually not  a problem. It is with the grain. Superglue it and clamp it and leave it overnight. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline okie64

  • Member
  • Posts: 1,134
Re: is it junk... Vine Maple crack
« Reply #13 on: March 22, 2012, 06:42:09 pm »
Kip, when i use rawhide I take the ace bandage off after 2 hours and push out any air bubbles it might have.
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: is it junk... Vine Maple crack
« Reply #14 on: March 22, 2012, 07:04:39 pm »
My vote is to go with it.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.
Pages: [1] 2
« previous next »