« previous next »
Pages: [1] 2

Author Topic: Rivercane prototype  (Read 7430 times)

0 Members and 1 Guest are viewing this topic.

Offline TRACY

  • Member
  • Posts: 4,523
Rivercane prototype
« on: July 19, 2008, 10:31:51 am »
I'm new with working cane and have just been building a few arrows to try different methods etc.. I just can't get over how well these things shoot! I plan on hunting with them this deer season and have been trying to find the right mix. I whittled a piece of scrap osage to make a plug/field point and fletched turkey feathers with deer sinew. Suggestions and criticism welcome.

Thanks Tracy

[attachment deleted by admin]
Logged
It is what it is - make the most of it!    PN500956

Offline cheapshot

  • Member
  • Posts: 123
Re: Rivercane prototype
« Reply #1 on: July 19, 2008, 10:45:51 am »
Good looking arrow. I like the osage field point. You might want to do a sinew or thread wrap at the base of the shaft next to the field point, to help keep the shaft from splitting if you hit something hard.
Logged

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: Rivercane prototype
« Reply #2 on: July 19, 2008, 10:58:17 am »
Good Job!! Like already stated....wrap the Shaft at the Point end also....and you may want to try and spiral the wrapping through the Feathers next time...it makes them lay better to the Shaft....how does it fly?? Is that tip heavy enough to keep it on track?? I tried one out of Walnut before...and it seemed too light and it would hit sporadically....switched to a Steel Field Point and it was awesomely accurate
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline DanaM

  • Member
  • Posts: 9,211
Re: Rivercane prototype
« Reply #3 on: July 19, 2008, 11:54:12 am »
Not that it matters a great deal but with the height of yer fletch and the gap between the fletch and shaft
I'm wondering is it noisy in flight? Nice arra :)
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline majsnuff

  • Member
  • Posts: 149
  • Shoot low boys the bad guys are riding ponies.
Re: Rivercane prototype
« Reply #4 on: July 20, 2008, 10:04:57 am »
Nice arrow. You are gonna find that these cane and bamboo arrows are tougher than all get out. In a shoot last spring, I hit the steel portion of a bonus target at 20 yards with one of mine on target #22 of a 40 target 3-D shoot. It just bounced off and I was able to finish the shoot with the same arrow. All the wood, carbon, and graphite arrows that hit the steel wound up in splinters.
Logged
keep it simple
make it fun

Offline TRACY

  • Member
  • Posts: 4,523
Re: Rivercane prototype
« Reply #5 on: July 20, 2008, 11:15:59 am »
Thanks for the input.

I agree with sinew on the point cheapshot.

El Destructo, it shoots great, but I wondered about the front of the shaft being light too. Surprisingly the fletch is fairly quiet with all of the gaps btwn shaft and fletch. This is a weak point for me. I feel like a one armed paper hanger getting the fletching in place :D. I'm gonna have to do my homework on on doing the spiral method for the future.

Dana, I left the fletch at 5.5" and trimmed it down. I thought it would whistle but it is pretty quiet. I expected it to sound like a flu flu in flight.

Majsnuff, I've worked wild rose shafts and some hardwood shoots and liked them, but cane is easier to straighten and is fun to shoot.
Logged
It is what it is - make the most of it!    PN500956

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Rivercane prototype
« Reply #6 on: July 20, 2008, 10:34:07 pm »
Looks good, you could probably trim that fletch down a bit lower. I made a few osage tips just like that a while back, and they shot pretty good. I found they did better on longer arrows to get a bit more weight. Looks like you're getting it all figured out, nice looking arrow.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline donnieonetrack

  • Member
  • Posts: 83
Re: Rivercane prototype
« Reply #7 on: July 23, 2008, 01:48:20 pm »
Tracy, arrow looks great.  One thing I would add to the other suggestions, the shaft looks green.  If you flex the shaft it should go back to straight, if not than it still needs drying and or tempering.

take care,

Donnie
Logged
Donnie Wilkerson
Gainesville, Florida

Offline TRACY

  • Member
  • Posts: 4,523
Re: Rivercane prototype
« Reply #8 on: July 27, 2008, 10:05:40 am »
Donnie, It might be the lighting but they are definitely seasoned. I have some green ones and there's no mistaking them. Thanks Tracy
Logged
It is what it is - make the most of it!    PN500956

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Rivercane prototype
« Reply #9 on: July 27, 2008, 10:24:30 am »
Gettin some good advice here - nice arra :). Practice, practice - they get easier as you go..
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Rivercane prototype
« Reply #10 on: July 28, 2008, 07:57:16 am »
Yeah, cane dries out to that greenish color if you keep it inside-sunlight will turn it yaller-tan.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline uwe

  • Member
  • Posts: 622
Re: Rivercane prototype
« Reply #11 on: July 28, 2008, 08:33:50 am »
Interesting job done. What is river cane exactly? Kind of reed? Bamboo sort? I`m interested in this. Is anybody willing to send me a few as a donation? Sorry about my boldness! ;)
Regards Uwe
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Rivercane prototype
« Reply #12 on: July 28, 2008, 10:18:29 am »
Uwe, River cane is one of 3 native North American bamboos (Arundaneria sp.).  They are A. gigantia(river cane), A. tecta(switch cane) and A. appalaciana(hill cane), all of which can be used for arrows. There are a few Asian bamboos in the same genera.
   Steve Parker's (Hillbilly) article(ArCANE Knowledge) in the newest edition of PA will give you good information about our native canes. I would be happy to send some to you but it will be later this fall or winter before I harvest any.     Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Savate

  • Guest
Re: Rivercane prototype
« Reply #13 on: July 28, 2008, 10:53:32 pm »
Cool!  I just made my first (see my other post here).  I want to try to make points now (I just used an old .38 brass to make a blunt).

How did you make that osage point?
Logged

Offline TRACY

  • Member
  • Posts: 4,523
Re: Rivercane prototype
« Reply #14 on: July 29, 2008, 09:17:34 am »
Thanks Savate. I used some scrap osage and whittled it to size and then shaped the sprue to fit inside the cane as a foreshaft. It
shoots great but I questioned the forward weight before shooting it. Loading the front of the shaft with a longer plug would help.

Tracy

Logged
It is what it is - make the most of it!    PN500956
Pages: [1] 2
« previous next »