Author Topic: My First "Beer Bottle" Point (Read 8792 times)

mike258 · « **on:** June 21, 2008, 09:59:59 pm »

Two discarded bottle bottoms and two band-aids later, here is my first "beer bottle" point. It's a tough job drinking all of that beer!

Mike

mullet · « **Reply #1 on:** June 21, 2008, 10:17:15 pm »

Good looking point Mike. Did you get the curve out of it?

mike258 · « **Reply #2 on:** June 21, 2008, 10:58:36 pm »

For the most part, yes. But if I had totally taken it out, it would have been tiny.

michbowguy · « **Reply #3 on:** June 22, 2008, 12:44:14 am »

good looking pernt!

cowboy · « **Reply #4 on:** June 22, 2008, 01:11:03 am »

Nice one! and that brown glass is so much fun to get to

. TV picture tubes make some awesome points - it's large, it's thick, and has that smoked glass look to it.

Otoe Bow · « **Reply #5 on:** June 22, 2008, 10:46:25 am »

Nice point Mike, how big is it?

All the discarded TV tube in the dumps and ditches have been shot out, should make them easy to pack out.

. I'm going to have to try that. Sounds like fun.

Mike

mike258 · « **Reply #6 on:** June 22, 2008, 01:03:16 pm »

It's 1 5/8" long (about 42 mm) and 1 1/8" wide at the widest (about 29 mm).

Mike

Pappy · « **Reply #7 on:** June 23, 2008, 07:47:07 am »

Very nice point,may have to swap to bottles instead of cans.

Pappy

DanaM · « **Reply #8 on:** June 23, 2008, 01:39:05 pm »

Nice point mike, I tried a few of them but by the time the bottle was empty I was ready for a nap not knapping

Otoe Bow · « **Reply #9 on:** June 23, 2008, 02:13:21 pm »

Dana

That's a pretty fair sized point from a bottle. Looks great.

Mike

Papa Matt · « **Reply #10 on:** June 27, 2008, 10:27:47 am »

Man that's nice. How do you work glass, same way as flint or is manufactured glass a special technique?

mike258 · « **Reply #11 on:** June 29, 2008, 08:36:04 pm »

Here are a couple more (hiccup).

Now these things are basically unifacial due to the curvature and thinness of the bottle bottom.

Nevertheless, they are a novelty.

Mike
Higher Resolution Picture at: http://www.knot2worry.us/ff/dal.jpg

Otoe Bow · « **Reply #12 on:** June 29, 2008, 11:32:26 pm »

Man those are nice. The edges aren't as jagged as the first one and they look SHARP. I gotta try me some of that some day.

Keep up the good work, and remember to knapp responsibly.

Mike

cowboy · « **Reply #13 on:** June 30, 2008, 10:43:09 pm »

Yes those are looking very nice. Don't get too carried away though, all things in moderation

.
Papa Matt: Same procedure as rock pretty much, just don't have to hit it as hard.

Pappy · « **Reply #14 on:** July 01, 2008, 10:49:47 am »

Nice points Mike.

Pappy

Primitive Archer