Author Topic: Where to lose 2 or 3#  (Read 144 times)

0 Members and 2 Guests are viewing this topic.

Online bentstick54

  • Member
  • Posts: 940
Where to lose 2 or 3#
« on: January 16, 2026, 11:38:10 pm »
Working on an osage bow and need to lose the final 2 to 3# of draw weight. Limb on the right is the top limb and has a little bit of twist between verticle lines 1 and 3, right out of the fade. It feels good in the hand at release.
1-3/4” wide at the fades, straight tapering to 3/8” tips. 66” ntn.
Would you tweek the tiller somewhere at this point, or sand the edges down to just lose the weight?

Offline Selfbowman

  • Member
  • Posts: 3,439
Re: Where to lose 2 or 3#
« Reply #1 on: Today at 12:18:21 am »
Cut fades closer to center of bow making the limbs longer it won’t take much,
Well I'll say!!  Osage is king!!

Offline superdav95

  • Member
  • Posts: 2,374
  • 3432614095
Re: Where to lose 2 or 3#
« Reply #2 on: Today at 03:03:33 am »
I bet by the time you sand it down and finish it it will be darn close to your goal. 
Sticks and stones and other poky stabby things.

superdav95@gmail.com

Offline Jim Davis

  • Member
  • Posts: 1,393
  • Reparrows
    • Reparrows
Re: Where to lose 2 or 3#
« Reply #3 on: Today at 11:04:32 am »
I bet by the time you sand it down and finish it it will be darn close to your goal.

+1
Jim Davis

Kentucky--formerly Maine

Offline simk

  • Member
  • Posts: 1,231
Re: Where to lose 2 or 3#
« Reply #4 on: Today at 11:23:10 am »
good looking bow. you could scrape a little here - or do as arvin said. soften the inners a little.
--- the queen rules ----

Offline Pat B

  • Administrator
  • Member
  • Posts: 38,029
Re: Where to lose 2 or 3#
« Reply #5 on: Today at 12:49:26 pm »
Have you shot the bow? If not put 100 arrows through it and recheck the weight. You could also scrape the sides a little to reduce weight.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bjrogg

  • Member
  • Posts: 11,584
  • Cedar Pond
Re: Where to lose 2 or 3#
« Reply #6 on: Today at 01:06:41 pm »
That’s a pretty bend. Whatever it takes to keep that bend.

Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline Del the cat

  • Member
  • Posts: 8,430
    • Derek Hutchison Native Wood Self Bows
Re: Where to lose 2 or 3#
« Reply #7 on: Today at 01:37:11 pm »
Round the corners a tad, sand it a little, talk harshly to it  ::) >:D
Del
Health warning, these posts may contain traces of nut.

Offline Burnsie

  • Member
  • Posts: 75
Re: Where to lose 2 or 3#
« Reply #8 on: Today at 02:51:36 pm »
Looks like your hand has healed up nicely - that is a nice bend.

Online bentstick54

  • Member
  • Posts: 940
Re: Where to lose 2 or 3#
« Reply #9 on: Today at 04:26:40 pm »
Lots of great thoughts. I think I’ve considered them all. I just get nervous when it gets down to the final nitty gritty. I have exercised it a lot on the tillering tree, but have limited short draw shots through it due to still have some soreness in my middle finger from my surgery. It’s sanded down close enough that I could finish it now, but can still sand more to remove some weight.

I originally put a tiny bit of reflex in the outer 1/3rds and flipped the tips so they were about 2” past the handle. It has lost about 1-1/4” of that.

The 20 or so shots I have through it at about 26” feels dead in the hand, and so far my bows in the past have not changed tiller or weight when worked this way.

I’m leaning towards working Arvins and Simks advice together so as not to risk any more set in the outer. Sometimes I just start second guessing myself and need some fresh eyes.