Author Topic: Osage Selfbow  (Read 921 times)

0 Members and 1 Guest are viewing this topic.

Offline bentstick54

  • Member
  • Posts: 902
Re: Osage Selfbow
« Reply #15 on: November 20, 2025, 11:37:00 pm »
Thanks Bj. Surgery is for trigger finger, which of course is on my middle finger of my string hand, and I shoot split finger with a glove, so it carries most of the pressure. Hopefully recovery will be quick and effective.

Offline Parnell

  • Member
  • Posts: 5,590
Re: Osage Selfbow
« Reply #16 on: November 22, 2025, 10:21:32 am »
Nice work!
1’—>1’

Offline Jim Davis

  • Member
  • Posts: 1,384
  • Reparrows
    • Reparrows
Re: Osage Selfbow
« Reply #17 on: November 22, 2025, 11:17:17 am »
The image of the belly side of the tip looks like edge grain. Is that just streaks in the finish?
Jim Davis

Kentucky--formerly Maine

Offline bentstick54

  • Member
  • Posts: 902
Re: Osage Selfbow
« Reply #18 on: November 22, 2025, 12:52:17 pm »
Jim, the only photos of the tips are off the back profile, and the tip up against my finger for size comparison.  This stave had some diluted red coloration in it and then heat bending the tips brought out the streaking grain. Only finish applied was 5 coats of Tru oil.

Offline Bob Barnes

  • Member
  • Posts: 1,004
Re: Osage Selfbow
« Reply #19 on: November 23, 2025, 07:46:24 pm »
You did an outstanding job on this bow.  It's even more impressive that it was some of your second-string wood.  Like I said on the LW, Iit's hard not to like everything about a bow that looks like it's ready to hunt.     :OK
Seems like common sense isn't very common any more...

Offline JW_Halverson

  • Global Moderator
  • Member
  • Posts: 12,164
Re: Osage Selfbow
« Reply #20 on: November 23, 2025, 10:11:44 pm »
Checks off everything on my grocery list, and doesn't add a single unnecessary thing!

That's nothing short of a banging good bow, right there!
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline bentstick54

  • Member
  • Posts: 902
Re: Osage Selfbow
« Reply #21 on: November 23, 2025, 10:57:39 pm »
Thanks JW,
Bob, this bow is actually out of a different tree than those second- string staves. I was ready for a break from the challenging ones. This stave took very little heat corrections, had decent ring ratio, and very few small knots. That’s why I decided to expand my knowledge and try flipping the tips. I’m very happy with the way it turned out.
I shot it 50 or 60 times here and there, as much as my hand would take, and seemed to be pretty dead in the hand and smooth. But I didn’t trust my release much, so I took it over to a friends and had him shoot it, and he thought it shoot and felt great to.

Offline Bob Barnes

  • Member
  • Posts: 1,004
Re: Osage Selfbow
« Reply #22 on: Today at 10:16:18 am »
Thanks JW,
Bob, this bow is actually out of a different tree than those second- string staves. I was ready for a break from the challenging ones. This stave took very little heat corrections, had decent ring ratio, and very few small knots. That’s why I decided to expand my knowledge and try flipping the tips. I’m very happy with the way it turned out.
I shot it 50 or 60 times here and there, as much as my hand would take, and seemed to be pretty dead in the hand and smooth. But I didn’t trust my release much, so I took it over to a friends and had him shoot it, and he thought it shoot and felt great to.

My memory isn't what it used to be...sorry.  I went back and reread your post on the LW...  :OK  I'm now looking forward to seeing some of the 2nd string bows as you finish them.   :BB  I hope your surgery goes well and that your hand heals quickly.
Seems like common sense isn't very common any more...

Offline bentstick54

  • Member
  • Posts: 902
Re: Osage Selfbow
« Reply #23 on: Today at 04:30:15 pm »
Thanks Bob. It will probably be awhile on any new ones. Hand surgery is for trigger finger, ( on my string hand of course), but by the time I should be able to actually draw a bow again I’ve scheduled an overdue lower back surgery for Feb 2nd. So in best case scenario I’m hoping to work slowly back into shooting some by April or May.