Author Topic: Black locusts bow  (Read 1521 times)

0 Members and 2 Guests are viewing this topic.

Offline superdav95

  • Member
  • Posts: 2,322
  • 3432614095
Re: Black locusts bow
« Reply #30 on: December 03, 2025, 10:51:28 pm »
Diddo.  Watching this too. 
Sticks and stones and other poky stabby things.

superdav95@gmail.com

Offline Selfbowman

  • Member
  • Posts: 3,370
Re: Black locusts bow
« Reply #31 on: December 03, 2025, 11:41:04 pm »
The bow is still about 90# so I’m going to try something. I’m going to trap the belly . I dividedthe limb width by 3  leaving the center flat and will scribe the edges to a 1/4” from the back. Why because I will completely lose a growth ring on one end . want to keep three growth rings if possible. Anyone done this with BL
Well I'll say!!  Osage is king!!

Offline Selfbowman

  • Member
  • Posts: 3,370
Re: Black locusts bow
« Reply #32 on: December 03, 2025, 11:51:09 pm »
The bow weighs 46.2 oz right now. Probably take 4-5oz out of handle section. I think this will finish at about 28oz. That leaves a lot to remove.
Well I'll say!!  Osage is king!!

Online sleek

  • Administrator
  • Member
  • Posts: 7,182
Re: Black locusts bow
« Reply #33 on: Today at 12:12:21 am »
I would absolutely NOT trap the belly. That is a recipe for failure with black locust. Id build it with a rectangular cross section or a slight crown.
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Jim Davis

  • Member
  • Posts: 1,386
  • Reparrows
    • Reparrows
Re: Black locusts bow
« Reply #34 on: Today at 12:53:07 am »
+1!
Jim Davis

Kentucky--formerly Maine

Offline Hamish

  • Member
  • Posts: 1,678
Re: Black locusts bow
« Reply #35 on: Today at 01:43:12 am »
+2