Author Topic: Making fast bows  (Read 199 times)

0 Members and 2 Guests are viewing this topic.

Offline sleek

  • Administrator
  • Member
  • Posts: 6,938
Making fast bows
« on: Today at 11:28:50 am »
What features of a bow have you guys learned that speeds your bows up?

Low set is a big one for me but honestly, I think proper tiller shape is more important. What things have yall all noticed?
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,802
Re: Making fast bows
« Reply #1 on: Today at 11:59:22 am »
I've never thought about speed when I build bows. Either they are shooters or they are good shooters.
 That said, I think narrow, light tips, reflexed limbs with reflexed tips, well balanced limbs and a good heat treated belly while reflexing.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Jim Davis

  • Member
  • Posts: 1,375
  • Reparrows
    • Reparrows
Re: Making fast bows
« Reply #2 on: Today at 03:07:01 pm »
As little mass as possible in the outer limbs. Pyramid design makes that easier.
Jim Davis

Kentucky--formerly Maine

Offline bambule

  • Member
  • Posts: 215
Re: Making fast bows
« Reply #3 on: Today at 03:33:13 pm »
That said, I think narrow, light tips, reflexed limbs with reflexed tips, well balanced limbs and a good heat treated belly while reflexing.

+1
Niedersachsen, Germany

Offline willie

  • Member
  • Posts: 3,358
Re: Making fast bows
« Reply #4 on: Today at 05:47:41 pm »
What features of a bow have you guys learned that speeds your bows up?

Assuming you mean "speeds your arrow up".....
Does it matter if the arrow is a high gpp arrow or a lower gpp?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,802
Re: Making fast bows
« Reply #5 on: Today at 06:01:03 pm »
Willie, when discussing arrows I always refer to hunting weight arrows, 10 +/- gpp. I shoot the same arrows no matter if I'm hunting or shooting 3D or targets.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Eric Krewson

  • Member
  • Posts: 5,572
Re: Making fast bows
« Reply #6 on: Today at 07:07:01 pm »
Chosing that magical osage that is as hard as a rock but cuts like butter with no splintering with a drawknife, is much heavier than run of the mill osage and has a perfect early wood to late wood ratio. Add some reflex and heat treatment and you have something special.

The top half of the sample on the left made some extra special bows for me.

The wide ring piece in the middle made very sluggish bows.


Offline sleek

  • Administrator
  • Member
  • Posts: 6,938
Re: Making fast bows
« Reply #7 on: Today at 07:15:42 pm »
What features of a bow have you guys learned that speeds your bows up?

Assuming you mean "speeds your arrow up".....
Does it matter if the arrow is a high gpp arrow or a lower gpp?

Nah, I mean the bow. If you wanna speed an arrow up, you drop its weight. Speeding a bow up ( semanticly speaking ) means it will shoot any arrow weight faster than another bow.
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline willie

  • Member
  • Posts: 3,358
Re: Making fast bows
« Reply #8 on: Today at 08:20:54 pm »
Nah, I mean the bow. If you wanna speed an arrow up, you drop its weight. Speeding a bow up ( semanticly speaking ) means it will shoot any arrow weight faster than another bow.
granted, lighter arrows will generally be faster with most bows (all other things being equal).

if you are asking about light arrows tho, isn't it true that there is a point of diminishing returns when it comes to reducing arrow mass? and that some bow designs work better with lighter arrows?

but maybe you are asking about bows for more typical 10 gpp or thereabouts weight arrows?