« previous next »
Pages: [1]

Author Topic: heath treating elm bow  (Read 1290 times)

0 Members and 1 Guest are viewing this topic.

Offline Jjpso

  • Member
  • Posts: 101
heath treating elm bow
« on: March 17, 2021, 11:41:35 am »
hello there! I am doing a sinew backed elm recurve.
its around 56 inches long, with small recurves, 2 inches fades and 4 inches handle. hoping for 50-55 pounds at 25 inches draw!
i heath treated it after steaming in the recurves, and got it bending pretty even (I got it to my target weight at 19 inches draw) but with tillering  the majority of the heath treated wood got scraped! would you heath treat it again before sinewing?! because after is not an option...:)

thanks in advance

Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: heath treating elm bow
« Reply #1 on: March 17, 2021, 04:18:45 pm »
Heat treating quite often needs repeating...
Del
Logged
Health warning, these posts may contain traces of nut.

gutpile

  • Guest
Re: heath treating elm bow
« Reply #2 on: March 17, 2021, 04:31:02 pm »
you will retill after sinewing also... If back is good enough to get bending to 20" and braced.. then heat treat.. then sinew... then retill.. both will add poundage too... gut
Logged

Offline Jjpso

  • Member
  • Posts: 101
Re: heath treating elm bow
« Reply #3 on: March 17, 2021, 08:03:39 pm »
Quote from: Del the cat on March 17, 2021, 04:18:45 pm
Heat treating quite often needs repeating...
Del
sorry Del, didn't understand what you meant...
Logged

Offline PatM

  • Member
  • Posts: 6,737
Re: heath treating elm bow
« Reply #4 on: March 17, 2021, 10:17:56 pm »
Quote from: Jjpso on March 17, 2021, 08:03:39 pm
Quote from: Del the cat on March 17, 2021, 04:18:45 pm
Heat treating quite often needs repeating...
Del
sorry Del, didn't understand what you meant...

  If you scrape it all off you can  and probably should re-do it.
Logged
Pages: [1]
« previous next »