« previous next »
Pages: [1] 2

Author Topic: backed wrong side!!  (Read 2589 times)

0 Members and 1 Guest are viewing this topic.

Offline chasing crow

  • Member
  • Posts: 269
backed wrong side!!
« on: January 09, 2021, 01:53:29 pm »
Has anyone been stupid enough to back the wrong side of a limb? I used Gorilla Wood Glue and burlap. Any removal suggestions?
Logged
We know more than we think we do. Pass your knowledge on to our youth

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: backed wrong side!!
« Reply #1 on: January 09, 2021, 01:55:25 pm »
Heat might work. Contact Gorilla Glue tech support. They will give you the answer. That's how I found out about TBIII breaking down at 150 degrees.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline chasing crow

  • Member
  • Posts: 269
Re: backed wrong side!!
« Reply #2 on: January 09, 2021, 02:13:09 pm »
Good advice Pat. Making my daughter's boyfriend a hunting bow after a 4-5 year lay-off from building. I even told myself to watch what side I backed the day before I actually screwed it up! Getting old I guess.   
Logged
We know more than we think we do. Pass your knowledge on to our youth

Offline PatM

  • Member
  • Posts: 6,737
Re: backed wrong side!!
« Reply #3 on: January 09, 2021, 05:03:04 pm »
Sand it off with coarse paper.  What sort of belly does this bow have that no hints were detected that it was the wrong side?
Logged

Offline HH~

  • Member
  • Posts: 1,742
Re: backed wrong side!!
« Reply #4 on: January 09, 2021, 05:27:25 pm »
4" grider with a sanding disc on it. Wood/power planner, 6ft belt sander.

HH~
Logged
MAFA: Makin America Free Again

Long is the road, Hard is the way.

Mother Gue never raised such a foolish child. . . .

Readily will I display the intestinal fortitude required to fight onto the Ranger objective and complete the mission though I be the lone survivor. RLTW

Offline ssrhythm

  • Member
  • Posts: 334
Re: backed wrong side!!
« Reply #5 on: January 09, 2021, 07:22:13 pm »
Since nobody is giving you grief, I will. 

I want some of what you were smoking! 

That is all I can muster, as I haven't been doing this long enough to make that mistake yet.  I don't think I will make that mistake, but I also know that I've never made a mistake that I thought I would make.
Logged

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: backed wrong side!!
« Reply #6 on: January 09, 2021, 07:30:04 pm »
Nope. Never did that. I don’t back many bows though.lol

I have cut arrow shelf on wrong side of handle though.

Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise

Offline maitus

  • Member
  • Posts: 310
Re: backed wrong side!!
« Reply #7 on: January 09, 2021, 07:53:06 pm »
How is it possible to back wrong side :)? And if its done then why is it wrong side. I have made good shooters with every direction of belly wood grain. I would like to see pic.
Logged

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: backed wrong side!!
« Reply #8 on: January 10, 2021, 12:09:16 am »
Quote from: bjrogg on January 09, 2021, 07:30:04 pm
Nope. Never did that. I don’t back many bows though.lol

I have cut arrow shelf on wrong side of handle though.

Bjrogg
BJ, that just makes areal nice bow for a person who shoots from that side!  Send me in, Coach :BB (SH) (lol)!  It is possible to correct that slight error, as I did (with help) on "Transdex" the bow I was gifted by Badger.  Still shoots pretty good!
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline mmattockx

  • Member
  • Posts: 984
Re: backed wrong side!!
« Reply #9 on: January 10, 2021, 11:13:42 am »
Quote from: chasing crow on January 09, 2021, 01:53:29 pm
I used Gorilla Wood Glue and burlap. Any removal suggestions?

I removed a backing of cotton fabric and TBIII by carefully using my belt sander to get the bulk of it, then a block and coarse paper to finish. It certainly will provide penance for your mistake as it is a tedious job that requires care lest you wreck a bow in the making.


Mark
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: backed wrong side!!
« Reply #10 on: January 10, 2021, 11:21:59 am »
Don't feel bad, Chasing Crow, we have all done things like this even if some don't want to admit it. On my first recurve I realized afterwards that one recurve turned up, one turned down. I think it is that as new builders we get in a hurry and are not concentrating or are distracted. As long as we learn from our mistakes we are ahead of the game.  :OK
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline HH~

  • Member
  • Posts: 1,742
Re: backed wrong side!!
« Reply #11 on: January 10, 2021, 12:06:15 pm »
Imagine that? Good deal. Always a fix out there somewhere.

HH~
Logged
MAFA: Makin America Free Again

Long is the road, Hard is the way.

Mother Gue never raised such a foolish child. . . .

Readily will I display the intestinal fortitude required to fight onto the Ranger objective and complete the mission though I be the lone survivor. RLTW

Offline chasing crow

  • Member
  • Posts: 269
Re: backed wrong side!!
« Reply #12 on: January 10, 2021, 12:44:31 pm »
I just read me your kind replies. Yes, not too swift. But it is the first bow I've built blindfolded! Cheers!
 
Logged
We know more than we think we do. Pass your knowledge on to our youth

Offline Selfbowman

  • Member
  • Posts: 3,161
Re: backed wrong side!!
« Reply #13 on: January 10, 2021, 12:57:32 pm »
Just put a backing on back and retiller.
Logged
Well I'll say!!  Osage is king!!

Offline sleek

  • Member
  • Posts: 6,764
Re: backed wrong side!!
« Reply #14 on: January 10, 2021, 02:10:19 pm »
I cut the string nocks on the wrong side once. You are not alone. On the plus side, it will be easy to remove with a little heat, the glue will weaken and the burlap will pull right off.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others
Pages: [1] 2
« previous next »