Author Topic: White Ash ????  (Read 1147 times)

0 Members and 1 Guest are viewing this topic.

Offline Selfbowman

  • Member
  • Posts: 3,161
White Ash ????
« on: October 18, 2020, 08:15:36 pm »
How is the tension- compression ratios? Width -length etc. This one is 2-1/8 at the fades 69”non. What’s a good weight for ash?  Arvin
Well I'll say!!  Osage is king!!

Offline Selfbowman

  • Member
  • Posts: 3,161
Re: White Ash ????
« Reply #1 on: October 18, 2020, 08:17:20 pm »
Pic
Well I'll say!!  Osage is king!!

Offline PatM

  • Member
  • Posts: 6,737
Re: White Ash ????
« Reply #2 on: October 18, 2020, 08:50:33 pm »
Reduce it to a thin strip and back a Perry reflex Osage.  You'll be happier. ;)

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: White Ash ????
« Reply #3 on: October 18, 2020, 09:57:59 pm »
It is probably the only wood I never liked using but it is on me. I kept getting chrysalis.
The only ash that didn't chrysalis was from a board.
Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline simk

  • Member
  • Posts: 1,159
Re: White Ash ????
« Reply #4 on: October 19, 2020, 02:48:54 am »
heat treating will avoid set and chrysals and turn it into a very reliable bowwood. that dimensions easily make a 60#+ bow.  (-S trapping the sides always is a good idea too...its almost impossible to snap it over the back.
« Last Edit: October 19, 2020, 03:18:54 am by simk »
--- the queen rules ----

Offline Selfbowman

  • Member
  • Posts: 3,161
Re: White Ash ????
« Reply #5 on: October 19, 2020, 09:03:12 am »
Smik that’s what I was  interested In the trapping. Ok so trap and heat treat. I was thinking 45 to 50# bow.
« Last Edit: October 19, 2020, 09:07:41 am by Selfbowman »
Well I'll say!!  Osage is king!!