« previous next »
Pages: [1]

Author Topic: Knot check  (Read 1046 times)

0 Members and 2 Guests are viewing this topic.

Offline Fox

  • Member
  • Posts: 997
Knot check
« on: June 13, 2020, 02:47:44 pm »
This correct? Thanks

-Fox

97952 by Livvydog, on Flickr

97950 by Livvydog, on Flickr

97951 by Livvydog, on Flickr

Logged
Why must we make simple things so complicated?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Knot check
« Reply #1 on: June 13, 2020, 04:40:41 pm »
It looks like you took the crown off of the the knot in 2nd pic. I always add a drop of super glue on knots just for insurance.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Fox

  • Member
  • Posts: 997
Re: Knot check
« Reply #2 on: June 14, 2020, 03:22:36 pm »
Quote from: Pat B on June 13, 2020, 04:40:41 pm
It looks like you took the crown off of the the knot in 2nd pic.

I may have a tiny bit in that pic its a bit scuffed up from some more ruff sandpapper.. is it okay?  Ill smooth it out before bending of course...

Logged
Why must we make simple things so complicated?

bownarra

  • Guest
Re: Knot check
« Reply #3 on: June 15, 2020, 12:00:20 am »
You done good :)
But you should measure the width of the knot and add that onto the width of the limb there. This will keep strain levels where they should be.
Logged

Offline Fox

  • Member
  • Posts: 997
Re: Knot check
« Reply #4 on: June 15, 2020, 09:44:57 am »
Okay thanks bownarra... i followed the grain around the knot, is that what you mean? Or should i add more width there? I have extra width right now so i can leave that bigger if i need to.
Logged
Why must we make simple things so complicated?
Pages: [1]
« previous next »