« previous next »
Pages: [1] 2

Author Topic: Fill a knot or not?  (Read 3747 times)

0 Members and 1 Guest are viewing this topic.

Offline osage outlaw

  • Member
  • Posts: 11,962
Fill a knot or not?
« on: May 01, 2020, 07:35:04 pm »
I started shaping this handle today and what looked like a fairly solid knot turned into a 1" deep hole angling through the upper fade.  My two thoughts are to leave it empty or to fill it with dyed epoxy.  I think there is enough wood around it to be stable.  I shot it today but I can't draw anywhere near 29".  What do you guys think?




Here is the other end of it.  I wish it was hollow all the way through.  I'd leave it empty for sure then. 




Logged
I started out with nothin' and I still got most of it left

Offline RyanY

  • Member
  • Posts: 1,999
Re: Fill a knot or not?
« Reply #1 on: May 01, 2020, 07:38:08 pm »
How straight is the hole? You could drill it out and plug it with something if you didn’t want to use epoxy.
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Fill a knot or not?
« Reply #2 on: May 01, 2020, 08:14:29 pm »
Quote from: Ryan Yoon (ryoon4690) on May 01, 2020, 07:38:08 pm
How straight is the hole? You could drill it out and plug it with something if you didn’t want to use epoxy.

I dont want to plug it with wood or horn.  I'd rather use epoxy with some color in it.
Logged
I started out with nothin' and I still got most of it left

Offline bjrogg

  • Member
  • Posts: 11,018
  • Cedar Pond
Re: Fill a knot or not?
« Reply #3 on: May 01, 2020, 08:28:21 pm »
I vote for leaving the hole.
Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise

Offline RyanY

  • Member
  • Posts: 1,999
Re: Fill a knot or not?
« Reply #4 on: May 01, 2020, 08:29:31 pm »
I think you could fill it then. Depends more on the aesthetic that you want.
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Fill a knot or not?
« Reply #5 on: May 01, 2020, 08:44:03 pm »
I was thinking dark red dye with black swirled into it.  Or maybe solid black with a thin blue line across it.  The guy I'm making it for was the son of a police chief before he was killed.
Logged
I started out with nothin' and I still got most of it left

Offline Dances with squirrels

  • Member
  • Posts: 1,222
Re: Fill a knot or not?
« Reply #6 on: May 02, 2020, 02:31:38 am »
A buddy of mine just finished up a bow this week with a hole like that . He filled it with a piece of polished turquoise.
Logged
Straight wood may make a better bow, but crooked wood makes a better bowyer

Offline stuckinthemud

  • Member
  • Posts: 2,355
    • avenue woodcarving
Re: Fill a knot or not?
« Reply #7 on: May 02, 2020, 04:09:58 am »
I'd fill it
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Fill a knot or not?
« Reply #8 on: May 02, 2020, 04:41:15 am »
Leave it, so you can tell target archers it's where you screw in the stabilizer bar  >:D
Del
Logged
Health warning, these posts may contain traces of nut.

Offline HH~

  • Member
  • Posts: 1,742
Re: Fill a knot or not?
« Reply #9 on: May 02, 2020, 06:08:36 am »
Like that shooter riser. Make a good "hang from tree hook" hunter!

I would not fill it with just two part exoxy. Would fit some dark or black wood, Gaboon etc and fit it.  Then epoxy that in. It's in a spot where you have relieved half the bow where you will get some flex thru the upper fade and vibration. Fitting a piece with a smaller amount of epxoy and wood will be much stronger in a tricky spot.

It may have helped if you left some meat on the top fade and not trimmed down. That wood on the opposite of the arrow pass would have gone a long way to support that area. Looking at the grian in that spot i see it swirls and waves so it should be strong enough. If it does come apart right there it gets purty ugly.


HH~
« Last Edit: May 02, 2020, 06:12:32 am by HedgeHunter »
Logged
MAFA: Makin America Free Again

Long is the road, Hard is the way.

Mother Gue never raised such a foolish child. . . .

Readily will I display the intestinal fortitude required to fight onto the Ranger objective and complete the mission though I be the lone survivor. RLTW

Offline bassman

  • Member
  • Posts: 962
Re: Fill a knot or not?
« Reply #10 on: May 02, 2020, 06:28:53 am »
Osage saw dust, and crazy glue will make that hole strong.Pack it in their ,let it dry ,and sand it down. I have used that fix on a lot of bows with excellent results.
Logged

Offline Eric Krewson

  • Member
  • Posts: 5,433
Re: Fill a knot or not?
« Reply #11 on: May 02, 2020, 06:52:10 am »
I use sawdust and superglue to fill inletting errors on flintlocks that won't show as well as gaps in other wood work, it makes and exceptionally strong patch after the chemical reaction takes place between the wood and glue, don't breathe the fumes, they are nasty.
Logged

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Fill a knot or not?
« Reply #12 on: May 02, 2020, 06:55:30 am »
I vote leave it
Logged

Offline HH~

  • Member
  • Posts: 1,742
Re: Fill a knot or not?
« Reply #13 on: May 02, 2020, 09:06:04 am »
Yeah, maybe not.

Guy sent me this other day. Think i seen this fella b4.

They kund go like this when the blow where yer knot is.

HH~
Logged
MAFA: Makin America Free Again

Long is the road, Hard is the way.

Mother Gue never raised such a foolish child. . . .

Readily will I display the intestinal fortitude required to fight onto the Ranger objective and complete the mission though I be the lone survivor. RLTW

Offline TimBo

  • Member
  • Posts: 1,047
Re: Fill a knot or not?
« Reply #14 on: May 02, 2020, 09:24:28 am »
Ooof.  I don't think even Mr. Krewson could fix that one!
Logged
Pages: [1] 2
« previous next »