« previous next »
Pages: [1] 2

Author Topic: Question for the group  (Read 2392 times)

0 Members and 1 Guest are viewing this topic.

Offline TimothyR

  • Member
  • Posts: 658
  • PM110782
Question for the group
« on: April 03, 2020, 07:54:45 pm »
Is this black locust?  And do you have to take sapwood off or can a layer be left on?
Logged
Freedom dies one compromise at a time. III%

Offline Hrothgar

  • Member
  • Posts: 1,477
Re: Question for the group
« Reply #1 on: April 03, 2020, 08:05:08 pm »
I'm pretty sure that's BL. I haven't used any for 15  years but I remember the popular consensus was that you could leave up to to 1/3 of the limb thickness sapwood for a natural backing.
Logged
" To be, or not to be"...decisions, decisions, decisions.

Offline Jim Davis

  • Member
  • Posts: 1,352
  • Reparrows
    • Reparrows
Re: Question for the group
« Reply #2 on: April 03, 2020, 09:36:07 pm »
I made a bl bow that was almost all sapwood in the limbs, because the tree was too small to do otherwise. It was a great bow and finally failed in compression when over-drawn.
Logged
Jim Davis

Kentucky--formerly Maine

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Question for the group
« Reply #3 on: April 03, 2020, 10:07:43 pm »
Looks like BL to me. The bigger tree in the 2nd pic looks like it has quite a twist to it.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Dvshunter

  • Member
  • Posts: 1,402
Re: Question for the group
« Reply #4 on: April 03, 2020, 10:08:51 pm »
I agree with Pat on both counts.
Logged
"There is a natural mystic blowing through the air; if you listen carefully now you will hear." Robert Nesta Marley

Offline TimothyR

  • Member
  • Posts: 658
  • PM110782
Re: Question for the group
« Reply #5 on: April 04, 2020, 01:24:25 am »
Quote from: Pat B on April 03, 2020, 10:07:43 pm
Looks like BL to me. The bigger tree in the 2nd pic looks like it has quite a twist to it.

Pat. That pic was just added  for bark reference. I cut a larger one down in the same area. and peeled the bark off. I just wanted to make sure that it was bl as I thought it was. The one I cut is pretty straight, 10' long and 5" at the base. I think I can get a couple bows out of it. Didn't know if I should take the sapwood off or not.
Logged
Freedom dies one compromise at a time. III%

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Question for the group
« Reply #6 on: April 04, 2020, 06:44:28 am »
Yes BL will grow in colonies.Where there is one others usually are there too.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Swampman

  • Member
  • Posts: 1,046
  • Primitive Archer subscription number PM109299
Re: Question for the group
« Reply #7 on: April 04, 2020, 07:18:51 am »
I agree that is black locust.

I recently made a bow out of black locust that ended up almost all sapwood.  There is just a small amount  of heart wood on the belly.  It turned out to look really nice and has decent performance.  I am currently working on another in which I am chasing a sap wood ring so I end up with more heart wood so the contrast is sap and heart wood is more even.  I am hopeful this one will be even better.

Good luck with your black locust.
Logged

Offline TimBo

  • Member
  • Posts: 1,047
Re: Question for the group
« Reply #8 on: April 04, 2020, 07:37:39 am »
Yep, I would say that is BL.  Small thorns, right?  I can't zoom in enough to tell.  My experience with BL leads me to take the sapwood off.  It has checked on me really badly when just"peeled and sealed".  I have a couple of staves now that I didn't have time to work down to heartwood, so I left the bark on.  The sapwood is a real bugger to get off once it is dried.  I think if the sapwood is thick and you like the contrast, I would chase down to the last ring or two before the heartwood. 
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Question for the group
« Reply #9 on: April 04, 2020, 08:34:36 am »
Do you see the long seed pods?
I've made many BL bows and learned on it.
If you do not have enough heartwood then you can lead the sapwood.
Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline bassman

  • Member
  • Posts: 962
Re: Question for the group
« Reply #10 on: April 04, 2020, 09:19:53 am »
I have tried the sap wood method with agonizing results.  The backs would either break, or the bellies fretted. Probably me , not the wood. I made 4 with no luck with that wood. Then I found a thicker ringed log ,and chased a clean ring into the heart wood. All of those came out good with no breaks, or frets, so I favor chasing a heart wood ring with Black Locust . Same thing with Osage. JMO. Good luck with yours.
Logged

Offline TimothyR

  • Member
  • Posts: 658
  • PM110782
Re: Question for the group
« Reply #11 on: April 04, 2020, 09:55:22 am »
Here is the one I cut. Should be able to get 1 or 2 bows out of it. Hopefully
Logged
Freedom dies one compromise at a time. III%

Offline TimothyR

  • Member
  • Posts: 658
  • PM110782
Re: Question for the group
« Reply #12 on: April 04, 2020, 09:58:19 am »
More
Logged
Freedom dies one compromise at a time. III%

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Question for the group
« Reply #13 on: April 04, 2020, 11:17:57 am »
Timothy, just because the tree is straight doesn't mean it's not twisted. Have you split it yet?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline TimothyR

  • Member
  • Posts: 658
  • PM110782
Re: Question for the group
« Reply #14 on: April 04, 2020, 09:55:53 pm »
Quote from: Pat B on April 04, 2020, 11:17:57 am
Timothy, just because the tree is straight doesn't mean it's not twisted. Have you split it yet?

Not yet
Logged
Freedom dies one compromise at a time. III%
Pages: [1] 2
« previous next »