« previous next »
Pages: [1] 2

Author Topic: Back to work on a horn project - horn body finished  (Read 8450 times)

0 Members and 2 Guests are viewing this topic.

Offline JW_Halverson

  • Member
  • Posts: 11,923
Back to work on a horn project - horn body finished
« on: December 30, 2019, 10:27:34 pm »
After taking far too long of a hiatus, I am back in the shop on the next phase of the job - setting the plug in the base. The horn had slowly gone back to the natural oval shape and needed to be warmed up to a plastic state where it would conform to the round walnut plug. I cheated by using a little two part epoxy to get a good seal.

Five minute Devcon did the trick fast and permanent.
« Last Edit: January 05, 2020, 12:55:26 pm by JW_Halverson »
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Back to work on a horn project
« Reply #1 on: December 30, 2019, 10:59:04 pm »
Looking good so far!
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline Mike Yancey

  • Member
  • Posts: 222
Re: Back to work on a horn project
« Reply #2 on: December 31, 2019, 08:15:10 am »
Looking good. I love bags and horns.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Back to work on a horn project
« Reply #3 on: December 31, 2019, 09:37:24 am »
We all need a break occasionally.  ;)  Looking good, John.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Back to work on a horn project
« Reply #4 on: December 31, 2019, 12:37:43 pm »
Horn question - is a threaded 2 piece base cap for filling the horn authentic?  If so, about when did that develop?
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Back to work on a horn project
« Reply #5 on: January 01, 2020, 03:54:54 am »
Quote from: Hawkdancer on December 31, 2019, 12:37:43 pm
Horn question - is a threaded 2 piece base cap for filling the horn authentic?  If so, about when did that develop?
Hawkdancer

As far as I know that is more modern. This is a one piece plug.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Back to work on a horn project - horn body finished
« Reply #6 on: January 05, 2020, 12:59:34 pm »
The carved spout section is now finished and stained. A.coat of wax to shine it up is all it needs.

Next I will need to finish the spout plug and sew the leather tabs onto the woven woolen strap. I can smell the finish line from here, friends.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Back to work on a horn project - horn body finished
« Reply #7 on: January 05, 2020, 03:19:55 pm »
Looks very cool, John.  8)  Nice work.  :OK
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline chamookman

  • Member
  • Posts: 3,026
Re: Back to work on a horn project - horn body finished
« Reply #8 on: January 06, 2020, 02:25:14 am »
Good lookin' Horn JW  :-M ! Bob
Logged
"May the Gods give Us the strength to draw the string to the cheek, the arrow to the barb and loose the flying shaft, so long as life may last." Saxon Pope - 1923.

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Back to work on a horn project - horn body finished
« Reply #9 on: January 06, 2020, 11:47:11 am »
Coming right along!  You'll be poring powder very soon!
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Back to work on a horn project - horn body finished
« Reply #10 on: January 07, 2020, 09:01:19 am »
Great looking horn, John.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline bowtarist

  • Member
  • Posts: 3,503
  • Primitive Archer Subscription Number PM103651
Re: Back to work on a horn project - horn body finished
« Reply #11 on: January 12, 2020, 06:25:58 pm »
Looks like a gooder Jdub!
You gonna keeper plain and simple or do a scrimshaw?
Logged
(:::.)    Osage music played daily. :)

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Back to work on a horn project - horn body finished
« Reply #12 on: January 13, 2020, 12:06:20 pm »
Quote from: bowtarist on January 12, 2020, 06:25:58 pm
Looks like a gooder Jdub!
You gonna keeper plain and simple or do a scrimshaw?

Not scrimshawing anything! I'm just no talented in that area.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Parnell

  • Member
  • Posts: 5,556
Re: Back to work on a horn project - horn body finished
« Reply #13 on: January 14, 2020, 11:39:17 am »
Very good looking, JW!  Looking forward to seeing it all done!
Logged
1’—>1’

Offline Tracker0721

  • Member
  • Posts: 736
Re: Back to work on a horn project - horn body finished
« Reply #14 on: February 01, 2020, 07:24:26 am »
That looks great! I like the spout on it. Is the cap hollowed to hold more powder?
Logged
May my presence go unnoticed, may my shot be true, may the blood trail be short. Amen.
Pages: [1] 2
« previous next »