Author Topic: White Birch self bow  (Read 4004 times)

0 Members and 1 Guest are viewing this topic.

Offline bassman

  • Member
  • Posts: 962
White Birch self bow
« on: October 20, 2019, 09:44:36 pm »
46 lbs.at 26 inches.58 inches long,and 2 inches wide at fades to 3/4 inch wide at the tips. With a 425 gr.arrow it shot 159 fps average for 10 shots.Bow weighs 14 ozs. with the string. This is my second one as of late. 

Offline bassman

  • Member
  • Posts: 962
Re: White Birch self bow
« Reply #1 on: October 20, 2019, 09:58:01 pm »
more pics.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: White Birch self bow
« Reply #2 on: October 20, 2019, 10:02:21 pm »
Nice birch bow that looks well tillered. Good job.  :OK
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline IrishJay

  • Member
  • Posts: 442
Re: White Birch self bow
« Reply #3 on: October 20, 2019, 10:17:55 pm »
Very nice bow Bass, I like the nocks.
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline bassman

  • Member
  • Posts: 962
Re: White Birch self bow
« Reply #4 on: October 21, 2019, 11:24:25 am »
Pat B, it shoots harder than I thought it would.Did a lot of heat treat and, tillering to keep set at a  minimum. Compact ,and light as a feather.I can see why Paul Comstock liked this wood. Thanks, Irish Jay cut some small trees near my home, and have plenty more staves to play with this winter.Though it is not considered a premium bow wood it works great.

Offline hoosierf

  • Member
  • Posts: 492
Re: White Birch self bow
« Reply #5 on: October 22, 2019, 09:48:15 am »
Nice one Bassman. I like birch very much. Light as a feather in the hand.

Offline bassman

  • Member
  • Posts: 962
Re: White Birch self bow
« Reply #6 on: October 22, 2019, 10:59:51 am »
Here is one I built years ago that took 3 inches of set. No heat treat.

Offline bassman

  • Member
  • Posts: 962
Re: White Birch self bow
« Reply #7 on: October 22, 2019, 11:00:50 am »
Sorry for double pictures

Offline Jim Davis

  • Member
  • Posts: 1,352
  • Reparrows
    • Reparrows
Re: White Birch self bow
« Reply #8 on: October 22, 2019, 10:25:31 pm »
Very nice work. I'm impressed by the unbraced shape. I think your heat treating must have been a big help. I only tried birch once--yellow birch--and I think it may not have been as dry as it should have been.

Good speed too.
Jim Davis

Kentucky--formerly Maine

Offline bassman

  • Member
  • Posts: 962
Re: White Birch self bow
« Reply #9 on: October 23, 2019, 07:52:52 am »
Thanks Jim. I used quite a bit of repeated heat treating, and it was a very big help.

Offline Parnell

  • Member
  • Posts: 5,556
Re: White Birch self bow
« Reply #10 on: October 23, 2019, 08:10:15 am »
I always enjoy seeing "other" bow woods being done.  It looks good, cool post.
1’—>1’

Offline bassman

  • Member
  • Posts: 962
Re: White Birch self bow
« Reply #11 on: October 23, 2019, 08:43:12 am »
Thanks Parnell. It was a fun build.I will be making more from Birch God willing.

Offline Bayou Ben

  • Member
  • Posts: 661
Re: White Birch self bow
« Reply #12 on: October 23, 2019, 11:23:59 am »
Awesome job on that short of a piece w/ a stiff handle and a not common bow wood material  :OK :OK :OK

Offline bassman

  • Member
  • Posts: 962
Re: White Birch self bow
« Reply #13 on: October 23, 2019, 12:07:53 pm »
Thanks Ben. I flipped the tips a little also, and pushed it as much as I thought I could. My draw is short also, so that helps some in the tillering process.