« previous next »
Pages: [1] 2

Author Topic: I Need Help Making a Board Bow  (Read 4618 times)

0 Members and 4 Guests are viewing this topic.

Offline Kovoc

  • Member
  • Posts: 9
  • I live in Nova Scotia, Canada
I Need Help Making a Board Bow
« on: October 12, 2019, 07:51:05 pm »
I want to get into the hobby of making and using bows and someone reccomended starting out by making a board bow, can someone tell me how to make one and how to use it? I'd also appreciate some help and tips with making arrows.
Logged

Offline Deerhunter21

  • Member
  • Posts: 2,261
  • What do you despise? By this are you truly known.
Re: I Need Help Making a Board Bow
« Reply #1 on: October 12, 2019, 07:56:19 pm »
Hey Kovoc, like i said, straight grain, both sides. you do not want grain violations or it could lift a splinter or just blow altogether. you want to make the arrows after you make the bow as they have to be tuned to the bow. by a 1"x2"x6' at home depot for a board im kinda busy right now so i cant give the best answer. oh and also,

Welcome to PA! :BB
Logged
Life before death. Strength before weakness. Journey before destination.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: I Need Help Making a Board Bow
« Reply #2 on: October 12, 2019, 08:04:01 pm »
Welcome to PA, Kovoc.
 Look on the "How To..." page. at the top of the page is George Tsoukalas'(aka Jawge) is a link to his bow and arrow building sight.  Jawge gives good, helpful info for finding the right board to building and tillering a board bow and making arrows from boards.
 Ask lots of questions here on the forum and we'll have you building a bow in no time.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Deerhunter21

  • Member
  • Posts: 2,261
  • What do you despise? By this are you truly known.
Re: I Need Help Making a Board Bow
« Reply #3 on: October 12, 2019, 08:17:15 pm »
Logged
Life before death. Strength before weakness. Journey before destination.

Offline bassman

  • Member
  • Posts: 962
Re: I Need Help Making a Board Bow
« Reply #4 on: October 12, 2019, 08:21:12 pm »
Can also find utube videos  by Clay Hayes ,Mike's bowyers bow, and others on making board bows.
Logged

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: I Need Help Making a Board Bow
« Reply #5 on: October 12, 2019, 10:19:04 pm »
Welcome aboard, Kovoc!  There is a wealth of knowledge here, and freely given pointers and advice!
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: I Need Help Making a Board Bow
« Reply #6 on: October 13, 2019, 06:56:56 am »
In our Build a longs section I bumped up a topic that will help you. Have a look. You should be well on your way to a board bow between it and George's site referenced above.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: I Need Help Making a Board Bow
« Reply #7 on: October 13, 2019, 08:00:33 am »
Thank you for the kind words.

http://traditionalarchery101.com

Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: I Need Help Making a Board Bow
« Reply #8 on: October 13, 2019, 08:03:59 am »
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: I Need Help Making a Board Bow
« Reply #9 on: October 13, 2019, 08:23:38 am »
This is about the best description out there.

http://poorfolkbows.com/index.html
Logged

Offline jeffp51

  • Member
  • Posts: 1,641
Re: I Need Help Making a Board Bow
« Reply #10 on: October 13, 2019, 10:52:50 am »
And since Eric just posted, make a tillering Gizmo that he designed. It's super simple and the best thing I ever did when learning how to see and create an even bend
Logged

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: I Need Help Making a Board Bow
« Reply #11 on: October 13, 2019, 03:17:45 pm »
Logged

Offline Kovoc

  • Member
  • Posts: 9
  • I live in Nova Scotia, Canada
Re: I Need Help Making a Board Bow
« Reply #12 on: October 13, 2019, 07:52:17 pm »
Thanks everyone for the help so far! Ill read all links you sent soon. I need to know one more thing, what type of string do I need for a bow, Im guessing I cant use normal string
Logged

Offline Deerhunter21

  • Member
  • Posts: 2,261
  • What do you despise? By this are you truly known.
Re: I Need Help Making a Board Bow
« Reply #13 on: October 13, 2019, 07:57:06 pm »
I use dracon b-50 because its cheaper but it stretches a lot. If you stretch it then rub it while its streached and get it hot with the friction  it wont stretch anymore. I believe you can so this with your fingers. I would get another type of string though. Someone should be able to tell you a better one.
Logged
Life before death. Strength before weakness. Journey before destination.

Offline Kovoc

  • Member
  • Posts: 9
  • I live in Nova Scotia, Canada
Re: I Need Help Making a Board Bow
« Reply #14 on: October 13, 2019, 08:21:46 pm »
Okay, I'm just would like to know how much the string alone is gonna cost me
Logged
Pages: [1] 2
« previous next »