« previous next »
Pages: [1]

Author Topic: Buffalo horn  (Read 1834 times)

0 Members and 1 Guest are viewing this topic.

Offline cutty

  • Member
  • Posts: 64
Buffalo horn
« on: April 02, 2019, 07:52:05 pm »
Picked up some buffalo horn for tip overlays. Is it like wood, cut, rasp, sand, and stain?
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Buffalo horn
« Reply #1 on: April 02, 2019, 08:16:51 pm »
Yes.  But I've never tried to stain horn.  I don't know how well that would work.
Logged
I started out with nothin' and I still got most of it left

Offline cutty

  • Member
  • Posts: 64
Re: Buffalo horn
« Reply #2 on: April 02, 2019, 08:21:20 pm »
I meant seal, like with spar urethane.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Buffalo horn
« Reply #3 on: April 03, 2019, 04:49:56 am »
Like Clint said and yes, just seal over it with whatever sealer you normally use. I've used gel and regular super glue, Tite Bond glue and 2 ton epoxy to glue buff horn, all worked well.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Buffalo horn
« Reply #4 on: April 03, 2019, 09:00:19 am »
Water buffalo, or bison?  Probably not too much difference in the process, but I think the composition is different.  Not sure, so I asked.
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline cutty

  • Member
  • Posts: 64
Re: Buffalo horn
« Reply #5 on: April 03, 2019, 11:21:11 am »
Water buffalo
Logged

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: Buffalo horn
« Reply #6 on: April 03, 2019, 02:02:43 pm »
I have a good bit of it.  It polishes up nicely.  I stole my wifes Magic Nail File for the job.  Little 3 sided get up with different grits.  Snuck a new one in on her when she wasn't looking.
Logged
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Buffalo horn
« Reply #7 on: April 03, 2019, 11:03:36 pm »
THAT was a smart move! (lol).  I use diamond needle files for a lot of the fine work.  Got a bunch of cow horn that should work for nocks, and some antler for tips when I get to that level!
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry
Pages: [1]
« previous next »