« previous next »
Pages: [1]

Author Topic: Flax backed yew shortbow "Wyvern"  (Read 4360 times)

0 Members and 1 Guest are viewing this topic.

Offline dreamcraft_archery

  • Member
  • Posts: 129
Flax backed yew shortbow "Wyvern"
« on: March 09, 2019, 02:20:53 pm »
Here is one of my creations - yew shortbow backed with flax fibers braided by myself. It was great challenge for me. Firstly - it was shortest bow I ever attempted to do and secondly - first yew stave in my hands. It was incredibly demanding piece of wood, very bumpy, with lots of knots and some twists. But I managed to finish it and I think I did it well.
I used Taxus Baccata stave. Bow is 43" ntn and draws about 48lbs at 19". I was really surprised about its performance. Shoots sweet. I applied experimental backing layer. Finished with linseed oil and cow horn (full nocks and arrow pass) . Bow appearance inspired me how to name it - "Wyverne". Watch out, it can really bite!
Logged

Offline Russ

  • Member
  • Posts: 2,265
Re: Flax backed yew shortbow "Wyvern"
« Reply #1 on: March 09, 2019, 07:48:13 pm »
Nice bow! If it can bite, let it bite some deer!
Logged

Offline dreamcraft_archery

  • Member
  • Posts: 129
Re: Flax backed yew shortbow "Wyvern"
« Reply #2 on: March 10, 2019, 01:50:30 am »
Thank you Deerhunter. If only it was legal in my homeland!
Logged

Offline ohma2

  • Member
  • Posts: 960
Re: Flax backed yew shortbow "Wyvern"
« Reply #3 on: March 10, 2019, 09:13:32 am »
You got a shooter out of that tuff plece :OK
sure would be interesting to see the process to braid and and apply the flax ,you aught to do a build along im sure others woulld be interested to.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,667
Re: Flax backed yew shortbow "Wyvern"
« Reply #4 on: March 10, 2019, 09:25:13 am »
Very nice backed yew bow.  :OK   I think you could have gotten a few more inches of draw if you had brought the bend back closer to the handle.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Dante_F

  • Member
  • Posts: 179
Re: Flax backed yew shortbow "Wyvern"
« Reply #5 on: March 10, 2019, 10:33:53 am »
thats short bow! looks good
Logged

Offline Hawkdancer

  • Member
  • Posts: 5,042
Re: Flax backed yew shortbow "Wyvern"
« Reply #6 on: March 10, 2019, 11:02:05 am »
Very nice!  That is a good job.  I would also see how you did the braiding.  Neat!  Btw, where are you?
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline dreamcraft_archery

  • Member
  • Posts: 129
Re: Flax backed yew shortbow "Wyvern"
« Reply #7 on: March 10, 2019, 02:31:36 pm »
Ohma2, Delta_wolf, PatB, Hawkdancer - thanks for your kind words guys.
Building next bow using this backing I will document the whole process and I will gladly share it with all interested.
Speaking of the tiller I partly agree that it could bend a little more near handle section but wasn't sure about it- handle is a bit deflexed towards to both limbs and it's still bending there.
I am from Poland, Europe.   :BB
Logged

Offline aaron

  • Member
  • Posts: 1,037
Re: Flax backed yew shortbow "Wyvern"
« Reply #8 on: March 10, 2019, 03:33:24 pm »
cool bow. can we get more details on how you did the backing and some closeup photos of the back?
Logged
Ilwaco, Washington, USA
"Good wood makes great bows, but bad wood makes great bowyers"

Offline dreamcraft_archery

  • Member
  • Posts: 129
Re: Flax backed yew shortbow "Wyvern"
« Reply #9 on: March 11, 2019, 04:32:12 am »
Thank you aaron. As I mentioned I will do some photos how to make it when building next bow like this. Here a pic, at the moment I dont have any better.  :)
Logged
Pages: [1]
« previous next »