Author Topic: D bow question  (Read 2657 times)

0 Members and 1 Guest are viewing this topic.

Offline Sticks

  • Member
  • Posts: 31
D bow question
« on: January 22, 2019, 11:58:18 am »
I was wondering what are the advantages of a Cherokee style D bow other than ease of build and nostalgia.Im thinking about a build but have only built rigid handle bows so far,any opinions are appreciated.

Offline ksnow

  • Member
  • Posts: 545
Re: D bow question
« Reply #1 on: January 22, 2019, 12:02:31 pm »
You can get away with a shorter stave since there is no nonworking length (handle). Given the same length stave, a d bow will be under less tress at a given draw length.

And, they look really primitive.

Have fun with one.

Kyle

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: D bow question
« Reply #2 on: January 22, 2019, 12:06:32 pm »
they shoot really well,,

Offline Sticks

  • Member
  • Posts: 31
Re: D bow question
« Reply #3 on: January 22, 2019, 12:18:30 pm »
Thanks for the replys I have a 25 inch draw and am looking for 50 pounds out of a white oak stave would 62 NTN be a good starting point.

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: D bow question
« Reply #4 on: January 22, 2019, 12:20:07 pm »
Yes

Offline Bayou Ben

  • Member
  • Posts: 661
Re: D bow question
« Reply #5 on: January 22, 2019, 12:58:32 pm »
I agree with what was said above.  I also like how light they are in the hand and how easy they are to carry.

Offline Badger

  • Member
  • Posts: 8,124
Re: D bow question
« Reply #6 on: January 22, 2019, 01:14:46 pm »
  As said above, under a lot less stress, they tend to take less set and are very efficient shooters.

Offline Sticks

  • Member
  • Posts: 31
Re: D bow question
« Reply #7 on: January 22, 2019, 02:39:31 pm »
Im thinking 5/8 at the tips and 7/8 mid grip that sound like a plan or should I start out heavier

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: D bow question
« Reply #8 on: January 22, 2019, 03:07:43 pm »
1 1/4  or 1 1/2,, and narrow if needed as you tiller,, better to start out with some wiggle room,,

Offline Sticks

  • Member
  • Posts: 31
Re: D bow question
« Reply #9 on: January 22, 2019, 04:03:16 pm »
I should have been more specific above I was thinking 1 1/4 grip width 3/4 wide at the tips 5/8 thick at the tips and 7/8 thick at the grip thanks so much for the directions its appreciated add anything if you like.this would be the rough out.
« Last Edit: January 22, 2019, 04:16:31 pm by Sticks »

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: D bow question
« Reply #10 on: January 23, 2019, 11:48:29 am »
leave the limbs wide and parallel ...1 1/2,,, narrow the tips as needed,,

Offline burchett.donald

  • Member
  • Posts: 2,437
Re: D bow question
« Reply #11 on: January 25, 2019, 05:26:24 am »
Sticks,
          When I started with bendy's /D bows I found that proper tiller was a little more complicated than a stiff/non bending handle...Getting the proper circle and balance was a task...Luckily I had "half eye" to guide me...I found quickly that it was a different experience...I think you will enjoy the journey...The center comes into play moving at just full draw, which is tedious work unlike a rigid handle...Proper balance was really technical and touchy...Have fun and please keep us posted...When built correctly they are very efficient performers...Fun to carry also
                                                                                                                           Don
                                                                                                                                                                             
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: D bow question
« Reply #12 on: January 25, 2019, 06:16:53 am »
i enjoy making them from red oak boards. Thay are a little easier to tiller and seem to shoot really well and take less set. Jawge
Set Happens!
If you ain't breakin' you ain't makin!