« previous next »
Pages: [1] 2 3

Author Topic: another blacksmith knife  (Read 20139 times)

0 Members and 1 Guest are viewing this topic.

Offline KHalverson

  • Member
  • Posts: 758
another blacksmith knife
« on: December 26, 2018, 02:38:10 pm »
hot out of the forge.
forged from a Nicholson file.
clay oated and quenched in warm canola oil.
hot vinagar etched to show hamon
6.0 overall 2 3/4 blade.
legal everyday carry here in Michigan and thats my plan as soon as i get it in leather.
thanks for looking
Kevin









Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: another blacksmith knife
« Reply #1 on: December 26, 2018, 02:45:14 pm »
That is cool!   I like the hamon.  What kind of clay do you use?
Logged
I started out with nothin' and I still got most of it left

Offline KHalverson

  • Member
  • Posts: 758
Re: another blacksmith knife
« Reply #2 on: December 26, 2018, 03:14:42 pm »
Quote from: osage outlaw on December 26, 2018, 02:45:14 pm
That is cool!   I like the hamon.  What kind of clay do you use?


mecos from menards.

most any refractory cement will work.
imperial has been my favorite.


Logged

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: another blacksmith knife
« Reply #3 on: December 26, 2018, 03:41:18 pm »
Nice work!
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: another blacksmith knife
« Reply #4 on: December 26, 2018, 10:12:52 pm »
Nice replacement knife, Kevin.  ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline DC

  • Member
  • Posts: 10,396
Re: another blacksmith knife
« Reply #5 on: December 27, 2018, 09:22:07 am »
Can you clear something up for me? The hamon shows the difference in hardness, right? Will it tend to lose it's edge quicker where the hamon reaches the edge in those few spots?
Logged

Offline KHalverson

  • Member
  • Posts: 758
Re: another blacksmith knife
« Reply #6 on: December 27, 2018, 10:13:10 am »
Quote from: DC on December 27, 2018, 09:22:07 am
Can you clear something up for me? The hamon shows the difference in hardness, right? Will it tend to lose it's edge quicker where the hamon reaches the edge in those few spots?


correct.
i thought the same thing when i started but havent noticed a significant difference in hardness  till you get a ways above the line.
its still reasonably hard till you get about 1/3 the way up the blade.

you can feel  it when its sanded,
Logged

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: another blacksmith knife
« Reply #7 on: December 27, 2018, 10:21:36 am »
Do you put the clay on the edge or the back to fire?  I don't know much about forging yet.  Thanks,
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline KHalverson

  • Member
  • Posts: 758
Re: another blacksmith knife
« Reply #8 on: December 27, 2018, 10:27:19 am »
Quote from: Hawkdancer on December 27, 2018, 10:21:36 am
Do you put the clay on the edge or the back to fire?  I don't know much about forging yet.  Thanks,
Hawkdancer

spine.
the clay stopped 1/8 to 3/16 above where the actual line is.
Logged

Offline Stoner

  • Member
  • Posts: 356
Re: another blacksmith knife
« Reply #9 on: January 15, 2019, 02:55:59 am »
Great craftsmanship as always. One of these days I gotta try my hand at this. John
Logged

Offline dylanholderman

  • Member
  • Posts: 787
Re: another blacksmith knife
« Reply #10 on: January 16, 2019, 07:05:27 am »
Very nice, but is the edge still hard where the Hamon dips down to it?
Logged

Offline KHalverson

  • Member
  • Posts: 758
Re: another blacksmith knife
« Reply #11 on: January 16, 2019, 07:30:44 am »
Quote from: dylanholderman on January 16, 2019, 07:05:27 am
Very nice, but is the edge still hard where the Hamon dips down to it.


The edge seems to be holding up well.
If I ever get to the point I'm not happy with it I will reheat treat and temper.
Logged

Offline dylanholderman

  • Member
  • Posts: 787
Re: another blacksmith knife
« Reply #12 on: January 16, 2019, 07:35:30 am »
Cool  :OK
I haven’t done anything with hamons so I wasn’t sure if the hardened steel stops right at the line or if it was a bit past it.
Logged

Offline burchett.donald

  • Member
  • Posts: 2,437
Re: another blacksmith knife
« Reply #13 on: January 19, 2019, 09:19:04 am »
 Nice blade Kevin...Like the overall shape of the handle and blade
Logged
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: another blacksmith knife
« Reply #14 on: January 20, 2019, 08:55:15 am »
Really like that blade Kevin. That'll be a very handy knife to use and carry. I'd like to see what you come up with for leather to carry it.
Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise
Pages: [1] 2 3
« previous next »