« previous next »
Pages: [1] 2

Author Topic: Christmas knives  (Read 8684 times)

0 Members and 1 Guest are viewing this topic.

Offline dylanholderman

  • Member
  • Posts: 787
Christmas knives
« on: December 10, 2018, 10:15:09 pm »
Terrible pictures but here are two knives I just finished up for a family cousin, handles are blackwalnut with a homemade mosaic pin and hollow stainless for the other pins.
https://imgur.com/a/lp62ISw
Logged

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Christmas knives
« Reply #1 on: December 10, 2018, 11:04:25 pm »
Nice work!  Those are fine presents!
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Christmas knives
« Reply #2 on: December 11, 2018, 05:42:02 pm »
Nice knives, Dylan. I like your maker's mark.   :OK
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: Christmas knives
« Reply #3 on: December 11, 2018, 07:20:28 pm »
Nice work.
Logged

Offline dylanholderman

  • Member
  • Posts: 787
Re: Christmas knives
« Reply #4 on: December 12, 2018, 07:20:06 am »
Thanks guys  ;D

Yeah pat I need to get a stamp of it made so that they can be more consistent.
Logged

Offline KHalverson

  • Member
  • Posts: 758
Re: Christmas knives
« Reply #5 on: December 12, 2018, 03:36:18 pm »
very nice,
I really like the mosiac pins and the walnut looks great.
Logged

Offline Mesophilic

  • Member
  • Posts: 876
Re: Christmas knives
« Reply #6 on: December 12, 2018, 04:18:03 pm »
Very cool.  Did you elecrto etch your makers mark?
Logged
Trying is the first step to failure
-Homer Simpson-

Offline dylanholderman

  • Member
  • Posts: 787
Re: Christmas knives
« Reply #7 on: December 13, 2018, 07:18:35 am »
Hand engraved with a diamond burr in a dremel
Logged

Offline Mesophilic

  • Member
  • Posts: 876
Re: Christmas knives
« Reply #8 on: December 14, 2018, 08:01:19 pm »
If you can find a power source DIY electro etchjng isn't too difficult.  If you're interested in it I'll tell you what I know, otherwise I won't go in to details in case you already know how it works or just have no interest.
Logged
Trying is the first step to failure
-Homer Simpson-

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Christmas knives
« Reply #9 on: December 14, 2018, 08:05:57 pm »
There might be info on electro etching in the How To section. I think Forest Trecker posted it a few years ago.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline dylanholderman

  • Member
  • Posts: 787
Re: Christmas knives
« Reply #10 on: December 26, 2018, 01:01:45 pm »
After another knife I just finished that required much smaller engraving I’m on the boat at least to try it out, so yeah let me know what you have found on it  ;D
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Christmas knives
« Reply #11 on: December 26, 2018, 02:46:49 pm »
Nice looking knives Dylan
Logged
I started out with nothin' and I still got most of it left

Offline dylanholderman

  • Member
  • Posts: 787
Re: Christmas knives
« Reply #12 on: December 27, 2018, 05:54:08 pm »
thanks clint  :)

here's one more i finished up and delivered Christmas eve morning.
Osage scales and stainless liners, closed its 4 5/8''.




Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Christmas knives
« Reply #13 on: December 27, 2018, 06:05:17 pm »
Nice folder.  I like the scales.
Logged
I started out with nothin' and I still got most of it left

Offline dylanholderman

  • Member
  • Posts: 787
Re: Christmas knives
« Reply #14 on: December 27, 2018, 07:05:40 pm »
thanks :)
 i'm going to try and make up some more of these up and bring them to the classic, see if i can get some people to help pay for my vacation  >:D ;)
Logged
Pages: [1] 2
« previous next »