« previous next »
Pages: [1]

Author Topic: Horn reinforcement  (Read 3498 times)

0 Members and 1 Guest are viewing this topic.

Offline Mafort

  • Member
  • Posts: 424
Horn reinforcement
« on: October 23, 2018, 07:57:19 am »
So was trying to find some horn slats to use as a nick reinforment for some arrows I’m making for a bow. However I don’t have a ready supply of horn. Does anyone have any good sources of horn? Also are their alternatives that can be used? Dense wood? Maybe that epoxy styled stuff my wood shop has? I’m not positive on what it’s called but it’s beautiful stuff
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Horn reinforcement
« Reply #1 on: October 23, 2018, 10:41:23 am »
Antler or G10 would work also. A very hard wood would also take care of the job.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline JEB

  • Member
  • Posts: 1,735
Re: Horn reinforcement
« Reply #2 on: October 23, 2018, 11:18:50 am »
Get a cow horn, cut it in half  from tip to base and take a heat gun to it for a bit and then lay a heavy weight on it to flatten it out.  Or as Chris wrote, use deer antler. If you don't have antler I have plenty if you need some. 

I am guessing this is to reinforce your arrow nocks.
Logged

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Horn reinforcement
« Reply #3 on: October 23, 2018, 11:49:11 am »
No matter what way made on self nocks a good wrapping below the nock is pretty vital.
Logged
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Horn reinforcement
« Reply #4 on: October 23, 2018, 04:08:42 pm »
You can use lots of things for spines for reinforced self nocks. I've used osage and other hardwoods, piano ivories from a junk piano, and rawhide. I got the idea fro rawhide from Glenn St Charles' book Billets to Bows. I used dog chew squares and Tite Bond. Worked great.   :OK
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Mafort

  • Member
  • Posts: 424
Re: Horn reinforcement
« Reply #5 on: October 24, 2018, 11:41:45 am »
You’d be correct in assuming these are for arrows. I would prefer horn as it’s a tad bit easier to work (Atleast from my experience). There’s a guy the has horn blanks that are about 1/8in thick. Would that work? He’s also got some that are .300 thick.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Horn reinforcement
« Reply #6 on: October 24, 2018, 02:15:04 pm »
1/8" is a bit thick but will work.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Horn reinforcement
« Reply #7 on: October 25, 2018, 10:42:53 am »
You can sand the thickness down by reverse wrapping duct tape around two fingers, then lay some sandpaper on a very flat surface. Grab the horn slab and stick to the tape for easy sanding.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Mafort

  • Member
  • Posts: 424
Re: Horn reinforcement
« Reply #8 on: October 25, 2018, 12:18:42 pm »
Quote from: PEARL DRUMS/PEARLY/PD/DRUMS on October 25, 2018, 10:42:53 am
You can sand the thickness down by reverse wrapping duct tape around two fingers, then lay some sandpaper on a very flat surface. Grab the horn slab and stick to the tape for easy sanding.

Now that’s how you adapt and overcome right there
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Horn reinforcement
« Reply #9 on: October 25, 2018, 12:53:02 pm »
In this hobby that is a constant.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Stoner

  • Member
  • Posts: 356
Re: Horn reinforcement
« Reply #10 on: October 27, 2018, 06:16:03 am »
Hooves can be an alternate for horn. I have elk hooves and I'm sure deer hooves would work too. John
Logged
Pages: [1]
« previous next »