« previous next »
Pages: [1] 2

Author Topic: takedowns  (Read 10808 times)

0 Members and 1 Guest are viewing this topic.

Offline bowmunky13

  • Member
  • Posts: 149
  • eat more human
takedowns
« on: April 02, 2008, 12:30:12 pm »
hey all i have been reading about the backpack bow challenge.. was wondering if anyone had a set of blueprints that i can borrow or maybe point me to a build along? i am trying for a two piece takedown.... the style doesnt matter.. i just need something i can put in my little car that i can take to the range on post during lunch
Logged
death by natural causes

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,314
  • if you have to ask you wouldn't understand ,Tenn.
Re: takedowns
« Reply #1 on: April 02, 2008, 01:05:03 pm »
I plan to have a little follow along,not a real build along next week sometime ,as soon as I get it all togeather.I got the take down sleeve from 3 rivers.It is fairly simple to do and works like a champ.
As far as building one I don't know the fit on this one is really snug,If you are a mechanist you could
probably do it.  :)
    Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline bowmunky13

  • Member
  • Posts: 149
  • eat more human
Re: takedowns
« Reply #2 on: April 02, 2008, 01:18:31 pm »
thanks pappy.. i am rackin my brain trying to figure it out... ??? ;D :D
Logged
death by natural causes

jeduffey

  • Guest
Re: takedowns
« Reply #3 on: April 02, 2008, 04:15:02 pm »
You could get a BowBolt.
Logged

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: takedowns
« Reply #4 on: April 02, 2008, 04:25:31 pm »
Quote from: jeduffey on April 02, 2008, 04:15:02 pm
You could get a BowBolt.

They aint Cheap....but they look sturdy enough....break down like My Remington Rifle does!!
« Last Edit: April 03, 2008, 10:09:09 am by YankeeTejas »
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline bowmunky13

  • Member
  • Posts: 149
  • eat more human
Re: takedowns
« Reply #5 on: April 02, 2008, 10:59:44 pm »
where might i acquire this bow bolt?
Logged
death by natural causes

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: takedowns
« Reply #6 on: April 03, 2008, 11:01:44 am »
Try one of the suppliers listed in the advertisers section at the bottom of the main forum page.  3 Rivers carries several takedown options.  http://3riversarchery.resultspage.com/search?w=takedown
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,314
  • if you have to ask you wouldn't understand ,Tenn.
Re: takedowns
« Reply #7 on: April 03, 2008, 11:22:53 am »
There are some pictures of the take down system justin is talking about on the build along thread
under take down.It's not the bolt it's the sleeve.I have heard of the bolt or hinge but never seen
one. :)
    Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: takedowns
« Reply #8 on: April 03, 2008, 11:27:05 am »
Pappy, I think TBB 1 has a picture of both a sleve and a bolt. Justin
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,314
  • if you have to ask you wouldn't understand ,Tenn.
Re: takedowns
« Reply #9 on: April 03, 2008, 11:29:32 am »
Thanks,hadn't looked at it in a long time,I will check it out.  :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline bowmunky13

  • Member
  • Posts: 149
  • eat more human
Re: takedowns
« Reply #10 on: April 03, 2008, 02:37:10 pm »
thanx guys.. once again i have to say i am glad to have joined this family
Logged
death by natural causes

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: takedowns
« Reply #11 on: April 03, 2008, 04:09:03 pm »
I'm going to get to the bottom of a discussion we have had several times about takedown sleeves. We have wondered about the size to use if you have big or little hands. The small takedown sleeve and the large takedown sleeve are the same width. The small takedown sleeve is mostly square while the large has a rounded belly side which I think makes it more comfortable.  It is 1/4" deeper from belly to back, but it is only the rounding that causes this. Justin
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline akila

  • Member
  • Posts: 399
Re: takedowns
« Reply #12 on: April 03, 2008, 08:58:45 pm »
HI...from whatt material is this sleeves made of..??
Logged

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: takedowns
« Reply #13 on: April 03, 2008, 09:01:45 pm »
Steele sleeve, brass insert
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline akila

  • Member
  • Posts: 399
Re: takedowns
« Reply #14 on: April 03, 2008, 09:45:31 pm »
Aha...thks..it looks to me like its coper... ::)
Logged
Pages: [1] 2
« previous next »