« previous next »
Pages: [1] 2

Author Topic: Recurving a bow with set  (Read 3764 times)

0 Members and 1 Guest are viewing this topic.

Offline chrisdaggs

  • Member
  • Posts: 27
  • Thanks you for letting me join the forum
Recurving a bow with set
« on: August 06, 2018, 03:55:08 pm »
I was wondering if it is a good idea to recurve the limbs of a bow if it has any set?  If so would it help? My first completed bowhas taken about an inch and 3/4 or more of set . I still love to shoot it but wondering if it could improve the  performance?
Logged
Learning new tricks is a great way to spend the day.

Offline PatM

  • Member
  • Posts: 6,737
Re: Recurving a bow with set
« Reply #1 on: August 06, 2018, 03:57:12 pm »
Try it and you'll have an accurate answer.
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Recurving a bow with set
« Reply #2 on: August 06, 2018, 04:41:54 pm »
Possibly. How long is it and what is your draw length? A full draw pic always answers a lot of our questions as well.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline chrisdaggs

  • Member
  • Posts: 27
  • Thanks you for letting me join the forum
Re: Recurving a bow with set
« Reply #3 on: August 06, 2018, 05:33:03 pm »
The bow itself is 69" tip to tip  it still draws 50lbs @28". unfortunately I can't get the picture to fit the size to attach   
Logged
Learning new tricks is a great way to spend the day.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Recurving a bow with set
« Reply #4 on: August 06, 2018, 05:37:21 pm »
That is plenty of length for your draw, no matter the wood you used. The amount of set you have isn't so bad. If the bow is tillered well, then recurve the tips and see what you come up with. Expect about 3-7# increase depending on how long the recurves are and how much recurve you add. If anything? You will learn a little something along the way.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline chrisdaggs

  • Member
  • Posts: 27
  • Thanks you for letting me join the forum
Re: Recurving a bow with set
« Reply #5 on: August 06, 2018, 05:41:45 pm »
Thanks. It is actually made of oak  and backed with rawhide.  WIll heating the bow ruin the backing
Logged
Learning new tricks is a great way to spend the day.

Offline PatM

  • Member
  • Posts: 6,737
Re: Recurving a bow with set
« Reply #6 on: August 06, 2018, 06:14:02 pm »
The rawhide and glue won't hold up to any appreciable degree of heat necessary for recurving.  You'd have to strip it off and re-glue.
Logged

Offline scp

  • Member
  • Posts: 660
Re: Recurving a bow with set
« Reply #7 on: August 06, 2018, 07:46:28 pm »
Good question. Unfortunately I ask the same question too often over dozens of self-bows. But I seldom do anything and just make more bows. I would try heat treating the belly first, reflexing the whole limbs slightly up to the amount of set. If that holds, it might be worth while to recurve the tips up to 2 inches. If you want you can simply recurve the tips up to 2 inches more than the set. Good luck.
Logged

Offline chrisdaggs

  • Member
  • Posts: 27
  • Thanks you for letting me join the forum
Re: Recurving a bow with set
« Reply #8 on: August 06, 2018, 09:42:04 pm »
Thanks for the information I will let you know how it turns out.
Logged
Learning new tricks is a great way to spend the day.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Recurving a bow with set
« Reply #9 on: August 07, 2018, 05:35:50 am »
You don't need rawhide the last 8-10" anyhow as its stagnant, peel it off before you heat it up and don't bother replacing it.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Recurving a bow with set
« Reply #10 on: August 07, 2018, 06:08:08 am »
Strap it up straight or with maybe 1/2" block under the grip to give a hint of back set and heat treat the belly.
I've done this on a few bows and re-vitalised them. Re-tillering may be necessary to avoid any problem areas just taking set agian.
Be warned, if you try for too much back set you may crack the belly, but even that is repairable with a patch.
https://bowyersdiary.blogspot.com/2014/04/refurb-progress.html
Del
Logged
Health warning, these posts may contain traces of nut.

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: Recurving a bow with set
« Reply #11 on: August 07, 2018, 06:27:34 am »
It has been my experience that recurving finished bows often leads to cracking in the curve and misaligned limbs, proceed with caution.
Logged

Offline Badger

  • Member
  • Posts: 8,124
Re: Recurving a bow with set
« Reply #12 on: August 07, 2018, 08:55:08 am »
  In most cases if a bow took set it will just take more set if you recurve the tips. If the bow took set because it had tiller problems and you fix the tiller problems after recurving you may improve it.
Logged

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
Re: Recurving a bow with set
« Reply #13 on: August 07, 2018, 10:00:22 am »
Quote from: Badger on August 07, 2018, 08:55:08 am
  In most cases if a bow took set it will just take more set if you recurve the tips. If the bow took set because it had tiller problems and you fix the tiller problems after recurving you may improve it.

+1 what Steve said.
Maybe piking that stick to 64" or so, fix the tiller problems andheat the whole limb into reflex would help. Don't go for exessive reflex.
If it's me  -  I would make a new one. With more patience esp. through the tillering process.
Logged
Simon
Bavaria, Germany

Offline H Rhodes

  • Member
  • Posts: 2,172
Re: Recurving a bow with set
« Reply #14 on: August 08, 2018, 05:34:09 am »
You got some good advice from some awesome bowyers.  1 3/4” of set on your first completed bow is really not bad.  I would keep it as is and start on another one. 
Logged
Howard
Gautier, Mississippi
Pages: [1] 2
« previous next »