« previous next »
Pages: [1]

Author Topic: Process for gluing up multiple lams/pieces  (Read 2030 times)

0 Members and 1 Guest are viewing this topic.

Offline youngbowyer33

  • Member
  • Posts: 606
Process for gluing up multiple lams/pieces
« on: July 21, 2018, 01:40:30 pm »
How do you guys do a glue up when you have a backing, powerlam, belly lam, and handle pieces? Like do you glue it all together at once or maybe you glue the power lam to the belly first, then the back, and after you glue the handle on after you glued together all the pieces?

I think I'm going to do backing, powerlam, and belly wood at once and then glue on my handle later, maybe piece by piece of I get some bend in the handle during the glue up.

There seems to be a few options, so what do you do and why?
Logged
"All we have to decide is what to do with the time that is given to us"

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Process for gluing up multiple lams/pieces
« Reply #1 on: July 21, 2018, 03:54:11 pm »
A lot will depend on the glue used, how quickly it sets. It might be easier if you glue up the belly and power lam then add the backing. The handle riser can almost go on anytime. 
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Process for gluing up multiple lams/pieces
« Reply #2 on: July 21, 2018, 04:01:48 pm »
Great question, and one I've often thought about. Ill be interested to see some replies from a few guys. 
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: Process for gluing up multiple lams/pieces
« Reply #3 on: July 21, 2018, 07:18:20 pm »
When we glue them up at Roy's we glue all the layers at once then when dry we glue on the handle & horn tips.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Process for gluing up multiple lams/pieces
« Reply #4 on: July 21, 2018, 08:38:01 pm »
Quote from: Trapper Rob on July 21, 2018, 07:18:20 pm
When we glue them up at Roy's we glue all the layers at once then when dry we glue on the handle & horn tips.
Yeah but old Roy has all the power tools to do that, me I glue the powerlam then make sure that it's feathered out good , then i glue the belly on, then the riser
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Process for gluing up multiple lams/pieces
« Reply #5 on: July 22, 2018, 07:00:04 am »
Power lams are another thing. I dont think Roy uses them, or rarely.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline DC

  • Member
  • Posts: 10,396
Re: Process for gluing up multiple lams/pieces
« Reply #6 on: July 22, 2018, 09:01:03 am »
I glue one piece to the next. Rarely three pieces. Too much like herding cats.
Logged

Offline leonwood

  • Member
  • Posts: 762
    • Leonwood Bows
Re: Process for gluing up multiple lams/pieces
« Reply #7 on: July 22, 2018, 02:27:59 pm »
I always glue my powerlam on the belly first so I can sand the transition really smooth to reduce the risk of gaps. On tri-lams I never use a powerlam and just do the lams glue up in one go. I never glue my handles at the same time with my lams. This separation works really well and I have never messed up a glue up, and never have gaps in my glue line. I am never in a hurry so that helps a lot too ;D
Logged

Offline youngbowyer33

  • Member
  • Posts: 606
Re: Process for gluing up multiple lams/pieces
« Reply #8 on: July 22, 2018, 08:32:51 pm »
I thought it made sense to glue the powerlam on the belly wood first, so I did that on my 2 bows in progress. Thanks for the tips.

It really helped get the ends of the powerlam real thin and made it easy to check with the backing on it for gaps.

I really wanted to get a bow glued up tonight so I decided to try with the light running out. It was going okay until it started raining! I'll be sure to give myself plenty of time and light for the next one.
Logged
"All we have to decide is what to do with the time that is given to us"

Offline Bayou Ben

  • Member
  • Posts: 661
Re: Process for gluing up multiple lams/pieces
« Reply #9 on: July 23, 2018, 02:17:29 pm »
The biggest reason I build multiple lam bows is that you can bend thinner pieces better than thicker ones.  Once you glue two pieces together you now have a laminated composite piece that will bend according to the thickness of both pieces together; a lot different than 2 individual thin pieces. 
All of the pieces that I want to bend are glued at once.  In the case of the picture, backing, power lam, core, and belly.  The handle is added after once the bend in the handle is set.  I leave the core lams wide and add toothpicks on both sides the cut to width backing to keep everything aligned during glue up.  I've taken a lot of pointers from the way Roy Painter does his glue ups. 

 
Logged

Offline Stick Bender

  • Member
  • Posts: 2,003
Re: Process for gluing up multiple lams/pieces
« Reply #10 on: July 23, 2018, 03:15:01 pm »
Roy is a good guy you would never know it but he is pretty knowledgable on other type bows then tri lams to, I use the tooth pic method on the slippery riser also ! Just don't mention the part about me saying he is a good guy  >:D
« Last Edit: July 23, 2018, 03:19:56 pm by Stick Bender »
Logged
If you fear failure you will never Try !
Pages: [1]
« previous next »