« previous next »
Pages: [1] 2 3 ... 7

Author Topic: Christian Springs Rifle  (Read 46028 times)

0 Members and 2 Guests are viewing this topic.

Offline Mike Yancey

  • Member
  • Posts: 222
Christian Springs Rifle
« on: June 11, 2018, 07:11:40 pm »


My next project, a 58 caliber gain twist barrel  Edward Marshal Christian Springs rifle.
« Last Edit: January 06, 2020, 01:37:42 pm by Mike Yancey »
Logged

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Christian Springs Rifle
« Reply #1 on: June 11, 2018, 07:14:41 pm »
Sweeeet ..start.
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: Christian Springs Rifle
« Reply #2 on: June 12, 2018, 07:30:23 am »
WOW, that is a a spectacular stock blank.

On my Issac Haines project, that I posted pictures of the precarve issues, I have about decided to scrap the stock and start over. It is mighty fine wood as well.
Logged

Offline Mike Yancey

  • Member
  • Posts: 222
Re: Christian Springs Rifle
« Reply #3 on: June 12, 2018, 10:10:12 am »
Man I hate to see you give up on that piece of wood Eric!
Logged

Offline Mike Yancey

  • Member
  • Posts: 222
Re: Christian Springs Rifle
« Reply #4 on: June 12, 2018, 10:14:21 am »
Eric, I went back and looked at your lock picture again. Can you scab in the lock mortise like I did and move the lock up all the way to the top of your wrist as far as you can? That looks like it would get it almost where it needed to be.
Logged

Offline Mike Yancey

  • Member
  • Posts: 222
Re: Christian Springs Rifle
« Reply #5 on: June 20, 2018, 09:22:56 am »


This rifle is going to be a lot slower build than the last rifle, it will have a lot of carving from end to end and I have a lot of bows to build.
Logged

Offline PaulN/KS

  • Member
  • Posts: 1,388
Re: Christian Springs Rifle
« Reply #6 on: June 20, 2018, 12:19:16 pm »
What's the wood there Mike?
Logged

Offline Mike Yancey

  • Member
  • Posts: 222
Re: Christian Springs Rifle
« Reply #7 on: June 20, 2018, 12:54:36 pm »
 Its maple
Logged

Offline Mike Yancey

  • Member
  • Posts: 222
Re: Christian Springs Rifle
« Reply #8 on: June 21, 2018, 06:50:02 pm »


Got to do a little more today and its coming along nicely. This should be a tough little mountain rifle.
Logged

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Christian Springs Rifle
« Reply #9 on: June 22, 2018, 11:24:01 am »
Have you ever built one with a swamped barrel?  It takes more attention to detail, but once you carry that gun a far piece, you will love the balance, lighter heft, and improved steadiness of the sight picture.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Mike Yancey

  • Member
  • Posts: 222
Re: Christian Springs Rifle
« Reply #10 on: June 22, 2018, 03:07:03 pm »
I have several with swamped barrels and am building one now along with this rifle. Its a smooth bore on a cherry stock, took for ever to get the barrel inlet but its in good and ready to inlet the lock.
Logged

Offline Mike Yancey

  • Member
  • Posts: 222
Re: Christian Springs Rifle
« Reply #11 on: June 23, 2018, 08:32:13 pm »


Got the barrel about 90% inlet, looking forward to the detail work on this rifle.
Logged

Offline Mike Yancey

  • Member
  • Posts: 222
Re: Christian Springs Rifle
« Reply #12 on: June 28, 2018, 11:29:56 am »


The heat index here is awful here lately so I've been able to work a little on the rifle. I have the barrel all inlet now as well as the breech plug and tang. Will be doing the ramrod grove and hole next and some more stock and wrist shaping.



Started the ramrod grove.




Cleaned up the tang area.
« Last Edit: June 28, 2018, 04:42:25 pm by Mike Yancey »
Logged

Offline looper

  • Member
  • Posts: 78
Re: Christian Springs Rifle
« Reply #13 on: June 28, 2018, 06:35:34 pm »
How are you going to make the transition from the top of the side panel to the top of the barrel channel? That’s usually a curved cut, and not a 90* corner.
Logged

Offline Mike Yancey

  • Member
  • Posts: 222
Re: Christian Springs Rifle
« Reply #14 on: June 28, 2018, 07:20:48 pm »
I'll shape it as it gets closer and work on the lock pannels.
Logged
Pages: [1] 2 3 ... 7
« previous next »