« previous next »
Pages: [1] 2 3

Author Topic: Ca and horn nocks  (Read 6167 times)

0 Members and 1 Guest are viewing this topic.

Offline penderbender

  • Member
  • Posts: 733
  • island life...
Ca and horn nocks
« on: October 17, 2016, 04:21:43 pm »
Is ca glue fine for horn nocks? Or is epoxy better? Never done horn nocks but I'm going to. Haha thanks- Brendan
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Ca and horn nocks
« Reply #1 on: October 17, 2016, 04:25:09 pm »
I use thick CA
Logged

Offline FilipT

  • Member
  • Posts: 821
Re: Ca and horn nocks
« Reply #2 on: October 17, 2016, 04:48:56 pm »
What about super glue for gluing horn?
Logged

Offline Hans H

  • Member
  • Posts: 420
Re: Ca and horn nocks
« Reply #3 on: October 17, 2016, 04:59:44 pm »
I always use super clue,    Hans
Logged
Hans,      Bavaria, Germany

Offline bubby

  • Member
  • Posts: 11,054
Re: Ca and horn nocks
« Reply #4 on: October 17, 2016, 05:27:43 pm »
I use locktight professional super glue and have never had a failure. The two mating surfaces have to match up perfectly, then i justput a liberal amount on the bow surface that gets the horn and place the horn on it and move it so it is fully coated and press it together for a few seconds, no clamps rubber bands or anything
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline PatM

  • Member
  • Posts: 6,737
Re: Ca and horn nocks
« Reply #5 on: October 17, 2016, 06:00:32 pm »
I am always amused that people will build an extensively glued up bow that requires longer curing times and maybe even a spell in an oven but when it comes to last bits they just can't wait more than a few seconds.

 Epoxy does have a lot of advantages despite needing an overnight wait so I just grit my teeth and use it.
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Ca and horn nocks
« Reply #6 on: October 17, 2016, 06:45:18 pm »
I do like Bubby and never had one come off.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Ca and horn nocks
« Reply #7 on: October 17, 2016, 06:49:03 pm »
Quote from: mullet on October 17, 2016, 06:45:18 pm
I do like Bubby and never had one come off.
Yep ..... me too. but I bet epoxy works just as well.......
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline penderbender

  • Member
  • Posts: 733
  • island life...
Re: Ca and horn nocks
« Reply #8 on: October 17, 2016, 07:46:51 pm »
Thanks for all the replies guys! I'm gonna use thick ca cause that's what I have. Cheers- Brendan
Logged

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Ca and horn nocks
« Reply #9 on: October 17, 2016, 08:00:50 pm »
Just remember CA doesn't fill voids epoxy does.........................
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Ca and horn nocks
« Reply #10 on: October 17, 2016, 08:07:12 pm »
I've used TB glues, super glue, thin and gel and epoxy, all with good results
 If you use deer antler and super glue saturate the pithy center of the antler first, sand flat and glue to the tip. If you don't seal the pithy center first you will get a dry glue joint.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Ca and horn nocks
« Reply #11 on: October 17, 2016, 08:14:35 pm »
Epoxy may be a better choice for a porous antler joint....there may be something to.... when you say use "the type glue for the application"....... there is not one glue for every glue joint.....
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline PatM

  • Member
  • Posts: 6,737
Re: Ca and horn nocks
« Reply #12 on: October 17, 2016, 09:02:21 pm »
Sure there is, Epoxy! lol
Logged

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Ca and horn nocks
« Reply #13 on: October 17, 2016, 09:32:30 pm »
Point well taken PatM ... ;)
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Ca and horn nocks
« Reply #14 on: October 17, 2016, 09:35:40 pm »
I had a couple failures with crazy glue and overlays so I stopped using it.  Never had one with TB
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com
Pages: [1] 2 3
« previous next »