ISO

[LEGIONNAIRE]

Hello Fellows I know that many of us have other hobbies so If you know anyone that can make this or if you can make this let me know. Im looking for a 2.5-3 inch in diameter metal ball with a 3/4 inch hole down the middle. I;m looking to build a Maze. Let me know if you anyone can make this. Thank you!

Cesar

[Aaron H]

I can get you a precision ball bearing that size, but good luck drilling through it...
Aaron

[osage outlaw]

I can get you a precision ball bearing that size, but good luck drilling through it...
Aaron

Could you anneal it before drilling?

[Aaron H]

Yes Clint, and that would be the way to go.  BUT, I imagine you would still need a mill and a carbide bit to get through it, these things are hardened to the max.

[Aaron H]

Looks like 2" is all I have at the moment

[LEGIONNAIRE]

Aaron, thank you for the Reply. I dont have the tools to drill through it unfortunately. If anyone else can get something like that either metal or Stone that be great. 2 inch might be a little small too. Thank you for the help 

[bowtarist]

I would be willing to try to get a hole drilled in something for you. I have a full machine shop right next door to my welding shop. We do it all for each other. Sure they would give it a try. Keep me posted. dp

[Aaron H]

I could send DP that ball bearing if you want to give it a try.  Course it would still only be 2".   Either way, your call

[bubby]

There are some trailer balls that are 2 piece with a removable bolt

[osage outlaw]

Just curious, what are you using it for?

[Aaron H]

Clint he said he wanted to build a maze

[osage outlaw]

I don't know what that is

[Aaron H]

Oh, sorry Clint.   
Here you go.  Correct me if I am wrong Legionnaire

[osage outlaw]

Ahhh.  A skull cracker.  A 3" steel ball bearing would be a lot of weight to swing.  It would sure do the job if it hit the target though. 

[Aaron H]

At least I think that is what he is referring to