« previous next »
Pages: [1] 2

Author Topic: Finish an old project  (Read 3548 times)

0 Members and 1 Guest are viewing this topic.

Offline Emmet

  • Member
  • Posts: 102
Finish an old project
« on: April 17, 2016, 07:43:40 pm »
I picked up some Osage staves from a fellow a few month back. They were his fathers and have been sitting in his  garage for a while. They were more or less free so I started  where his father had rough out a blank and never finished.
The back was left un protected and had deep checks in both belly and back. The end were sealed with no checking.
After getting to one good ring this 67" stave needed cut to 57" due very thin limbs. There was a sharp curve that was in the rite place to make it near center shot. After floor tillering I recurved the tips. As I finished the tillering it had a pin knot develop a small  horizontal crack. I shot 100 arrows through it and it didn't get any  worse but decide to wrap it with thread as a precaution.  I added goat horn to the tips and some of my amateur art work to the belly.
Logged

Offline Emmet

  • Member
  • Posts: 102
Re: Finish an old project
« Reply #1 on: April 17, 2016, 07:50:35 pm »
It had some nice wiggles and twists so I left it natural.
The back and belly
Logged

Offline Emmet

  • Member
  • Posts: 102
Re: Finish an old project
« Reply #2 on: April 17, 2016, 07:56:09 pm »
Braced

And some of the art work
Logged

Offline Emmet

  • Member
  • Posts: 102
Re: Finish an old project
« Reply #3 on: April 17, 2016, 08:03:51 pm »
And the fd
55"ntn
12 strand d97 string
50@25
teak oil & tru oil finish
Logged

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Finish an old project
« Reply #4 on: April 17, 2016, 08:09:51 pm »
That's a beauty.............
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline David_Daugherty

  • Member
  • Posts: 319
Re: Finish an old project
« Reply #5 on: April 17, 2016, 08:33:46 pm »
Nice tiller and love those flipped tips 👍
Logged
"You can't put a price on being inspired"-Zooey Deschanel

Offline Stixnstones

  • Member
  • Posts: 1,695
Re: Finish an old project
« Reply #6 on: April 17, 2016, 08:48:36 pm »
that lil beauty is awesome, great recovery. really like everything about it.
Logged
DevilsBeachSelfbows

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Finish an old project
« Reply #7 on: April 17, 2016, 10:00:23 pm »
That's a great looking bow.  Nice job on it.
Logged
I started out with nothin' and I still got most of it left

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Finish an old project
« Reply #8 on: April 17, 2016, 10:22:04 pm »


  Using carbons shows you just can't let got of that speed thing yet.

  Where were from that's a disgrace not only to you, your selfbow but to all Osage bows.

   If you had a buck in your truck killed with a self bow and a carbon arrow. You'd never even get a turned head.  From me or any of my friends.

  If you want to shoot carbons get a re curve or compound. There not made for self bows

  Sorry shooting carbon arrows is not to primitive to me. I can just see a couple indain's setting around the camp fire flexing their arrows. Looking down their carbons getting ready for the next morning.

  Sorry about raining on your peraid. Just how I see it
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline Emmet

  • Member
  • Posts: 102
Re: Finish an old project
« Reply #9 on: April 17, 2016, 11:02:09 pm »
Thanks for the kind words guys.

Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Finish an old project
« Reply #10 on: April 17, 2016, 11:41:11 pm »
nice looking bow Emmet, and don't worry about crooked arrow he's like that crazy uncle that everybody has lol
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Finish an old project
« Reply #11 on: April 17, 2016, 11:49:47 pm »
Quote from: bubby on April 17, 2016, 11:41:11 pm
nice looking bow Emmet, and don't worry about crooked arrow he's like that crazy uncle that everybody has lol


That's putting it nicely. 
Logged
I started out with nothin' and I still got most of it left

Offline Fred Arnold

  • Member
  • Posts: 1,566
  • From up on Munson Creek
Re: Finish an old project
« Reply #12 on: April 18, 2016, 12:11:42 am »
Very nice!! That bow has character and it don't care what you shoot out of it even if you can't spell it.
Logged
I found many years ago that it is much easier and more rewarding working with those that don't know anything than those that know it all.

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: Finish an old project
« Reply #13 on: April 18, 2016, 02:16:15 am »
Beautiful bow, I love everything about it! Thanks for sharing.
There's another one for bow of  the month!

Patrick
Logged
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline chamookman

  • Member
  • Posts: 3,027
Re: Finish an old project
« Reply #14 on: April 18, 2016, 04:55:12 am »
Nice - I like that ! Bob
Logged
"May the Gods give Us the strength to draw the string to the cheek, the arrow to the barb and loose the flying shaft, so long as life may last." Saxon Pope - 1923.
Pages: [1] 2
« previous next »