Author Topic: How would you make a wooden blowgun ?  (Read 13750 times)

0 Members and 1 Guest are viewing this topic.

Offline ekalavya

  • Member
  • Posts: 60
How would you make a wooden blowgun ?
« on: November 20, 2015, 09:11:10 am »
"Cheap" tubes made of plastic, copper and other metal are already avaiable ....

I make my bows myself , so why not my blowgun ....

The first idea which came to me was making it like barrels, old wooden buckets and so on ....
splitting the dry branch free sapling into eight parts .... removing the sharp end and glueing
and wrapping the pieces together and thus having a octogonal "tube" ....

however later it came to me : "this might be stupid or impractical" ... because there is no historical
evidence for that ..... so this would be an untraditional way ... but two pieces of wood should
be right

later it came to me again .... maybe the first wood blowgun were burned  and smoothened with
tar, pitch or beeswax or what else was avaiable ....

anyway all descriptions i found (i did not find that many) say it is a lot of work and a bow together
with quiver and arrows is less work , weighs less and requires less wood

i am also not sure if a blowgun really requires good quality hardwood or if the wood does not
need to have the same qualities as bow wood

also there is no "Traditional Blowgun Bible" ... so things for blowguns are different

And this is exactly why I am asking you there , because  people who build wooden blowguns
on the northern hemisphere exists and they have experience


Offline TrevorM

  • Member
  • Posts: 205
Re: How would you make a wooden blowgun ?
« Reply #1 on: November 20, 2015, 09:17:57 am »
I'd imagine bamboo would be the thing to use
Trevor

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: How would you make a wooden blowgun ?
« Reply #2 on: November 20, 2015, 09:48:27 am »
I just Googled "Cherokee Blowguns"
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: How would you make a wooden blowgun ?
« Reply #3 on: November 20, 2015, 11:13:23 am »
Large River cane is the way to go. I've seen it split length ways, cleaned out and smoothed. Then put back together with hide glue and wrapped with thin rawhide strips.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline TrevorM

  • Member
  • Posts: 205
Re: How would you make a wooden blowgun ?
« Reply #4 on: November 20, 2015, 11:27:54 am »
If Wikipedia is to be believed they're illegal in CA, MA and DC which surprised me...
https://en.wikipedia.org/wiki/Blowgun
Trevor

Offline bowandarrow473

  • Member
  • Posts: 696
Re: How would you make a wooden blowgun ?
« Reply #5 on: November 20, 2015, 08:21:30 pm »
River cane or the large invasive stuff that looks like a 20ft cornstalk (Arundo Donax?) woks well, also Japanese Arrow Bamboo or really any other member of the bamboo family will work well. Also, elderberry shoots work too but be warned, the stuff is slightly poisinous and must be dried thoroughly and a mouth buffer added so as to ensure you don't get sick from the wood.
Whatever you are, be a good one.

riverrat

  • Guest
Re: How would you make a wooden blowgun ?
« Reply #6 on: November 20, 2015, 09:41:06 pm »
if i made one out of bamboo or cane instead of splitting it, cleaning nodes, then glueing and wrapping i think id find a long steel rod the same diam. i want for my darts. heat it up till it glows red, shove it down the tube. keep doing this until its done.Tony

Offline ekalavya

  • Member
  • Posts: 60
Re: How would you make a wooden blowgun ?
« Reply #7 on: November 21, 2015, 06:31:47 am »
So you all prefer bamboo or the better american rivercane.
I guess I will try. As plan B i thought of using a plastic tube surrounded by wood and
filling free space with asphalt, pitch , tar or some kind of wax. However working with asphalt, pitch
and tar would be new to me.

@TrevorM
I am sure a tube is still legal in those states. So unless you make a mouth piece or blowgun darts
it should be legal in those states too. it can not be that you have to remove your water pipes
and can not use a shower any more , because someone claims those are or could be used as
weapons.
It is even possible some metal tubes/pipes are used as primitive firearms , zip guns, samopal and so on.
They are not under gun law and matches are not ammo, although they could be used as such.
Also the possession of tobacco is legal, although deadly poison can easily be made out of it.

The odd thing is that this prohibition might be even against the US constitution for decades when not longer.
As i remember the US constitution says "all citiziens have the right to wear arms or so" .... this was even extended
to automatic and semi-automatic weapons. So a gun barrel is legal , but not when you blow a dart through it.
Although when you use precompressed air form another source it would be a primitive air gun or air softgun and
that would be legal. So together with a trigger , a plastic bottle , a pump and some isolation it would be perfectly legal
in those states too.

Offline TrevorM

  • Member
  • Posts: 205
Re: How would you make a wooden blowgun ?
« Reply #8 on: November 23, 2015, 10:57:23 am »
Just what I was thinking. It seems like one of those almost pointless laws where unless you got a really dumb cop or were doing something you shouldn't anyway they'd never bust you for it. Still something to keep in mind for anyone that does live in one of those places I guess.

It's funny, when I was a kid I'd make them out of old pens and shoe laces with pins in them for darts. I was breaking the law and didn't even know it  ;D
Trevor

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: How would you make a wooden blowgun ?
« Reply #9 on: November 23, 2015, 09:42:18 pm »
I believe the Cherokee's made them the way Tony describes. The first one I saw was made that way by Jonathan and he had it at PatB's first Camporama. We were trying to shoot darts with stone points through it.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline CavemanRob

  • Member
  • Posts: 22
Re: How would you make a wooden blowgun ?
« Reply #10 on: November 29, 2015, 02:57:00 pm »
The following is from wikipedia, but "Weapono Masters" had an episode where Mike Loades travels somewhere and makes a blowgun with one of the aboriginal tribes.

essentially they start with a small tree, cut it in half, hollow out a tube in the center, then put the two halves back together again.

I'm sure it can be found on youtube.



Weapon Masters
From Wikipedia, the free encyclopedia
Not to be confused with Weapons master.
Weapon Masters
Starring    Chad Houseknecht
Mike Loades
No. of seasons    1
No. of episodes    10
Release
Original network    Discovery Channel

Weapon Masters is a television show that premiered on the Discovery Channel on December 31, 2007 and on the Military Channel.[1]

Hosts Chad Houseknecht and Mike Loades, a weapons historian, choose a different historical weapon each week. While Loades explores its history—often traveling to the country from which it comes to interview modern practitioners—Houseknecht attempts to improve on it using modern technology (for example, a pneumatic device was added to a blowgun in one episode). At the end of each episode a challenge test of the new version is held.
-Rob
"nobody owns you, nobody owes you"

Offline ekalavya

  • Member
  • Posts: 60
Re: How would you make a wooden blowgun ?
« Reply #11 on: November 30, 2015, 09:00:33 am »
@Caveman.

Thank you for mentioning the "show". Usually they try to omit how it is exactly made or what troubles
you are going to face when you try to make one of your own.
What they show in some minutes , can take days of doing and days of asking other people,
thinking about how to do and so on are not even mentioned.

Also quality is important. As with bows , a ten or 15 pound bow is easily made compared to a quite durable bow with 45 or more pound of draw weight. In the same way a blowgun which is merely a roughed out peep hole with light coming in from the other end will not be suitable for hunting.
(the elbow long elderberry tube i made is something .... not deserving to be called a blowgun)

Offline Benas

  • Member
  • Posts: 1
Re: How would you make a wooden blowgun ?
« Reply #12 on: January 23, 2017, 04:06:34 am »
https://www.youtube.com/watch?v=pJBpkz29-DQ

This is a clip from a short film called "sunset over selungo". The guy just makes a blowpipe and then some poison darts.

Benas

Offline Lucasade

  • Member
  • Posts: 335
Re: How would you make a wooden blowgun ?
« Reply #13 on: January 23, 2017, 04:52:00 am »
River cane or the large invasive stuff that looks like a 20ft cornstalk (Arundo Donax?) woks well, also Japanese Arrow Bamboo or really any other member of the bamboo family will work well. Also, elderberry shoots work too but be warned, the stuff is slightly poisinous and must be dried thoroughly and a mouth buffer added so as to ensure you don't get sick from the wood.

In the UK children have been making whistles and blowguns from elder since forever (Shakespeare mentions it in one of his plays) - if it was poisonous then presumably they would have stopped?

According to the Woodland Trust elder is thought to derive from the Anglo Saxon 'aeld' meaning fire, as they used the stems as bellows to blow air into the centre of a fire. It doesn't mention physically blowing down it but I'm not familiar with Saxon pneumatic technology  ::)
« Last Edit: January 23, 2017, 05:03:30 am by Lucasade »

Offline GlisGlis

  • Member
  • Posts: 1,565
Re: How would you make a wooden blowgun ?
« Reply #14 on: January 24, 2017, 12:52:26 pm »
I think it could be difficult to find cane, arundo donax or bamboo long enough and with pretty constant internal diameter.