Author Topic: heat treating flint  (Read 15170 times)

0 Members and 1 Guest are viewing this topic.

Offline iowabow

  • member
  • Member
  • Posts: 4,722
heat treating flint
« on: November 13, 2015, 10:23:20 pm »
Got a late start after the sun went down. I had to finish Hunting first.
Could not wait rain coming next week.
« Last Edit: November 13, 2015, 10:30:50 pm by iowabow »
(:::.) The ABO path is a new frontier to the past!

Offline nclonghunter

  • Member
  • Posts: 1,779
Re: heat treating flint
« Reply #1 on: November 13, 2015, 10:45:18 pm »
Big fire, I want to see the results when it cools.
There are no bad knappers, only bad flakes

Offline Chippintuff

  • Member
  • Posts: 777
Re: heat treating flint
« Reply #2 on: November 13, 2015, 10:55:10 pm »
I have been doing my heat treating in a turkey roaster, but I have some stone that does not get adequate treatment at the temp it will go to. Maybe the aboriginal method would do the job. The problem around here is that the dirt is muddy and will be till next summer.

WA

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: heat treating flint
« Reply #3 on: November 13, 2015, 10:58:15 pm »
I have been doing my heat treating in a turkey roaster, but I have some stone that does not get adequate treatment at the temp it will go to. Maybe the aboriginal method would do the job. The problem around here is that the dirt is muddy and will be till next summer.

WA
where are you located ?
(:::.) The ABO path is a new frontier to the past!

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: heat treating flint
« Reply #4 on: November 14, 2015, 06:28:44 am »
A dim glow as I am heading out to the stand at 5:08am
(:::.) The ABO path is a new frontier to the past!

Offline nclonghunter

  • Member
  • Posts: 1,779
Re: heat treating flint
« Reply #5 on: November 14, 2015, 07:16:18 am »
Good luck on the hunt. Maybe you could lay a backstrap on those coals.
There are no bad knappers, only bad flakes

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: heat treating flint
« Reply #6 on: November 14, 2015, 08:35:41 am »
A pair came through no clear shot.
(:::.) The ABO path is a new frontier to the past!

Offline bowmo

  • Member
  • Posts: 1,035
Re: heat treating flint
« Reply #7 on: November 14, 2015, 11:55:27 am »
Very cool. Any idea on the temps it reaches?

Chippintuff: you can just build the fire over the removable pan in the roaster. Might want to throw some sand on the ground and set the pan on that and then add your rocks and sand and build up a fire.

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: heat treating flint
« Reply #8 on: November 14, 2015, 12:18:14 pm »
Very cool. Any idea on the temps it reaches?

Chippintuff: you can just build the fire over the removable pan in the roaster. Might want to throw some sand on the ground and set the pan on that and then add your rocks and sand and build up a fire.
About 600
(:::.) The ABO path is a new frontier to the past!

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: heat treating flint
« Reply #9 on: November 14, 2015, 12:31:20 pm »
Upon return (with no deer) the chert bakes
(:::.) The ABO path is a new frontier to the past!

Offline Chippintuff

  • Member
  • Posts: 777
Re: heat treating flint
« Reply #10 on: November 14, 2015, 01:57:00 pm »
I'm near Bryan/College Station, TX,

I like the idea of using a pan or such as a container under the fire.

WA

Offline RickB

  • Member
  • Posts: 301
Re: heat treating flint
« Reply #11 on: November 14, 2015, 05:46:42 pm »
I've used a washtub with sand in it before. Build the fire in the tub. Rick B

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: heat treating flint
« Reply #12 on: November 15, 2015, 07:43:25 am »
36 hours later heat rises from the pit. My pit is unlike others and will continue to treat the chert for days. The chert heat treat will be done in five days time.
(:::.) The ABO path is a new frontier to the past!

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: heat treating flint
« Reply #13 on: November 15, 2015, 07:44:55 am »
No addition Wood for a 4 day burn with a one day ramp down.
(:::.) The ABO path is a new frontier to the past!

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: heat treating flint
« Reply #14 on: November 15, 2015, 09:56:36 am »
I found some natural heat treated flint in the creak once.
(:::.) The ABO path is a new frontier to the past!