« previous next »
Pages: [1] 2 3

Author Topic: knot nightmare  (Read 3985 times)

0 Members and 1 Guest are viewing this topic.

Offline sleek

  • Member
  • Posts: 6,764
knot nightmare
« on: September 07, 2015, 03:14:42 pm »
How would yall deal with this?
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline sleek

  • Member
  • Posts: 6,764
Re: knot nightmare
« Reply #1 on: September 07, 2015, 03:15:22 pm »
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline sleek

  • Member
  • Posts: 6,764
Re: knot nightmare
« Reply #2 on: September 07, 2015, 03:18:04 pm »
I couldnt avoid it so I set it dead center.  Its 11.5" away from the tips on a 68" bow 45@28.  The knot section is 2" wide.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline OTDEAN

  • Member
  • Posts: 140
Re: knot nightmare
« Reply #3 on: September 07, 2015, 03:23:03 pm »
On a 2" wide bow that knot is tiny, I would not even sweat it, seems you have left enough wood as the grain meanders around the knot like a river around rocks.  Just like you should have.  Chill out and get that sucker shooting.    :) :) :)
Logged

Offline sleek

  • Member
  • Posts: 6,764
Re: knot nightmare
« Reply #4 on: September 07, 2015, 03:29:26 pm »
Allow me to restate
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline sleek

  • Member
  • Posts: 6,764
Re: knot nightmare
« Reply #5 on: September 07, 2015, 03:31:30 pm »
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Dakota Kid

  • Member
  • Posts: 897
  • Maker of Things
Re: knot nightmare
« Reply #6 on: September 07, 2015, 03:39:24 pm »
A super soak-er full of super glue and a decent backing? It looks like you'd still have a 1/2" on either side of the cluster give or take. I'd say it's more likely to survive than not, er ah... knot. No risk no fun right?

What's the other side look like?
Logged
I have nothing but scorn for all weird ideas other than my own.
~Terrance McKenna

Offline bubby

  • Member
  • Posts: 11,054
Re: knot nightmare
« Reply #7 on: September 07, 2015, 03:51:50 pm »
I don't think its a big deal sleek i had an area like that about 8" from the tip and i made a static out of it
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: knot nightmare
« Reply #8 on: September 07, 2015, 03:54:49 pm »
When in doubt, rawhide
Logged

Offline PatM

  • Member
  • Posts: 6,737
Re: knot nightmare
« Reply #9 on: September 07, 2015, 04:06:35 pm »
I would get going on those perfect staves you have.
Logged

Offline sleek

  • Member
  • Posts: 6,764
Re: knot nightmare
« Reply #10 on: September 07, 2015, 04:13:01 pm »
Quote from: PatM on September 07, 2015, 04:06:35 pm
I would get going on those perfect staves you have.

I have. I made one already and started another today. Will do another next weekend start to finish for the build along that was mentioned. I I have 3 more standing by waiting to be debarked and ring chased. After that, they sit and wait for inspiration.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,634
Re: knot nightmare
« Reply #11 on: September 07, 2015, 05:04:07 pm »
I'd fill that cluster of pins with super glue, get another back ring taking care around these pins and start reducing the belly. Leave that area a little stiffer than the rest of the limb.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: knot nightmare
« Reply #12 on: September 07, 2015, 06:14:59 pm »
I'm with Pat on the straight staves, ok just kidding, but I am with Pat on going down a ring or two and being real careful about the pins,, if you have enough wood to permit,, at that point I really think you gonna be ok,,, as stated probably ok as is,, just saying what I would do cause I have" bowyers paranoia syndrom"   :)
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: knot nightmare
« Reply #13 on: September 07, 2015, 06:36:53 pm »
Same as PatB said. Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline sleek

  • Member
  • Posts: 6,764
Re: knot nightmare
« Reply #14 on: September 07, 2015, 07:54:41 pm »


I broke out my wood gouge set and set to work. Solid ring and super glue. Hope it holds.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others
Pages: [1] 2 3
« previous next »