« previous next »
Pages: [1] 2

Author Topic: First Molly  (Read 3849 times)

0 Members and 1 Guest are viewing this topic.

Offline bubbles

  • Member
  • Posts: 932
  • PM110769
First Molly
« on: August 27, 2015, 04:39:47 pm »
First Molly - In the process of shooting in before I dress it up. Have put a couple dozen arrows through it so far. Sitting at 56#@25".  My draw is around 25-26" and it's  Shooting pretty good right now.
I know I have some lever thinning to do - What are some specs for lever dimensions from you Molly guys? 
This had a big drying check and a bunch of smaller checks which runs off the side of the bottom limb.  I filled it with warmed epoxy and it's holding really solid.  I'll give a thread/superglue wrap when I'm confident the tiller has settled.    Let me know what you think!



« Last Edit: August 27, 2015, 04:43:12 pm by bubbles »
Logged

Offline Del the cat

  • Member
  • Posts: 8,339
    • Derek Hutchison Native Wood Self Bows
Re: First Molly
« Reply #1 on: August 27, 2015, 05:22:44 pm »
Tiller looks good to me... mind I've only made one Molle'  ::)
I asked the same Q on levers... I think thin as you dare :o, just take 'em down a whisker at a time and quit at the first sign of flex (or go back a tad  ;) )
I went for a slightly triangular section, wider on the back, slightly concave sides, narrow on the belly... I was trying for a flight bow.
What is the wood?
Del
Logged
Health warning, these posts may contain traces of nut.

Offline wizardgoat

  • Member
  • Posts: 2,398
Re: First Molly
« Reply #2 on: August 27, 2015, 05:47:00 pm »
That looks awesome, nice bend!
Logged

Offline bubbles

  • Member
  • Posts: 932
  • PM110769
Re: First Molly
« Reply #3 on: August 27, 2015, 05:47:20 pm »
Thanks Del, and I forgot - American Elm.

Thanks Wizard!
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,084
  • }}}--CK-->
Re: First Molly
« Reply #4 on: August 27, 2015, 06:11:45 pm »
Really nice tiller
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

mikekeswick

  • Guest
Re: First Molly
« Reply #5 on: August 27, 2015, 06:20:15 pm »
Yep nice tiller.
Your thickness on the levers only needs to be a fraction like 1/16th to an 1/8th thicker than the end of your working limb. Then taper them back into the nock, I see a lot of these where the levers get thicker then are left than thickness out to the tips. Stress is decreasing as you get to the tips so the lever itself can taper quite dramatically without bending. I make mine a triangular cross section but with the point of the triangle along the back. If it's not bending it doesn't need excessive tension strength of a full width lever. You can also scoop out the sides of the triangle for further weight reduction. I like playing with things like this ::)
Logged

Offline dantolin

  • Member
  • Posts: 175
Re: First Molly
« Reply #6 on: August 28, 2015, 03:12:05 am »
Nice tiller on that Molly.
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,307
  • if you have to ask you wouldn't understand ,Tenn.
Re: First Molly
« Reply #7 on: August 28, 2015, 04:27:22 am »
Looks very good to me. Nice job. :)
 Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Del the cat

  • Member
  • Posts: 8,339
    • Derek Hutchison Native Wood Self Bows
Re: First Molly
« Reply #8 on: August 28, 2015, 04:28:46 am »
Quote from: mikekeswick on August 27, 2015, 06:20:15 pm
... I make mine a triangular cross section but with the point of the triangle along the back. If it's not bending it doesn't need excessive tension strength of a full width lever. You can also scoop out the sides of the triangle for further weight reduction. I like playing with things like this ::)
Yeah, I'd toyed with that layout... less wind resistance ;) but I went thin at the belly so it blends in with the V of the string loop.
I may rework the bow, or try your way round on the next (it's somewhere on my list of bows to make....)
The scooped sides look great, very sculptural.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline bowandarrow473

  • Member
  • Posts: 696
Re: First Molly
« Reply #9 on: August 28, 2015, 07:11:19 am »
Looks good.
Logged
Whatever you are, be a good one.

Offline Aaron H

  • Member
  • Posts: 3,437
Re: First Molly
« Reply #10 on: August 28, 2015, 08:01:34 am »
Great bend
Logged

Offline bubbles

  • Member
  • Posts: 932
  • PM110769
Re: First Molly
« Reply #11 on: August 28, 2015, 09:46:58 am »
Thanks guys!  I'm slowly working down the levers bit by bit as I'm shooting it in.  I'm really happy with this one so far.
Logged

blackhawk

  • Guest
Re: First Molly
« Reply #12 on: August 28, 2015, 10:29:41 am »
No more advice needed from me..but good looking bend. Did ya heat treat it?
Logged

Offline Hrothgar

  • Member
  • Posts: 1,478
Re: First Molly
« Reply #13 on: August 28, 2015, 01:04:00 pm »
Good looking Molly--wished mine turned out so well!
Logged
" To be, or not to be"...decisions, decisions, decisions.

Offline bubbles

  • Member
  • Posts: 932
  • PM110769
Re: First Molly
« Reply #14 on: August 28, 2015, 02:31:22 pm »
Yeah, one heat treatment where I added a few inches of reflex.  Then I added the warmed epoxy to the check.
Logged
Pages: [1] 2
« previous next »