Protecting fletching wraps?

[Willibow]

Howdy gang.

I've been using silk thread for fletching wraps on my arrows. ive been having a problem when I miss the target (happens more than I'd like to admit since I'm still pretty new to traditional). My fletching wrap string is being broken almost every time. Unfortunately, I shoot in a rocky area (in northern NV, everywhere is a rocky area  ) and most misses send my arrows skipping across the dirt and rocks. Almost without fail, one of these incidents leads to broken fletch wraps.

Is there any way you've found that works to make them a little more durable? Maybe I'm not using a good material with the silk thread? Maybe there's some tough sealer I can add to add to the life span of a fletching wrap?

Thanks for any help! It's much appreciated!

[osage outlaw]

I use heavy outdoor coat thread for fletching wrapping.  Then I soak it twice in liquid super glue.  I stretch a piece of a plastic shopping bag over my finger tip and use that to smooth out the super glue around the wrap.

[Willibow]

Thanks outlaw, the super glue and heavier thread are something I will have to try.  I used to use super glue to attach fletching, and I never needed to wrap them, but I recently switched to fletch-tite platinum. It is a lot softer and easier to rework after it has dried, but dang it sure doesn't seem to hold then fletching said down as well.

That, and I fell in love with the look of wrapped fletching.

[osage outlaw]

Here is what they look like

[Willibow]

Thanks for sharing the pic, outlaw. I'm curious, what are the brown marks near the back of the fletchings? It looks like some heat was applied there?

[osage outlaw]

That's from a feather burner.  It got the finish to hot and scorched it.  Those marks bug the crap out of me.  They usually don't show on a natural colored shaft.  I'm going to try to keep it from doing that next time

[Willibow]

Thanks, I thought it might be some heat treatment or something to help keep feathers glued on.

[agd68]

Hey Willibow, I use clear nail polish to seal my wrapping. Works pretty good. Dental floss is a great fletching wrap.

[Pat B]

Super glue works well with silk wrappings. Put it on and let it dry, sand with very fine sand paper, add more super glue, sand and add more super glue. This will give you a solid band around the fletching that is very strong and almost abrasive proof.

[DC]

If you have a method of spinning the shaft(I use my lathe) you can squeeze the wrapping with a piece of scrap leather while dripping the CA on it. It turns out real smooth without sanding. I don't have enough hands to show the CA bottle.

[wizardgoat]

I paint watered down tb3 on my silk thread. Also, use 3 strands at least. I used to use super glue too, but I hate breathing that stuff if I don't have to