« previous next »
Pages: [1]

Author Topic: where would i find a choked pressure flaker?  (Read 4279 times)

0 Members and 1 Guest are viewing this topic.

Offline beartail

  • Member
  • Posts: 162
where would i find a choked pressure flaker?
« on: May 22, 2015, 04:03:09 pm »
i was watching a video on to youb and the guys pressure flaker looked like it had some kind of choke on it for easy wire replacement or extention. anyone ever see something like that? and where would i find just the choke to make it myself?
Logged

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: where would i find a choked pressure flaker?
« Reply #1 on: May 22, 2015, 06:13:54 pm »
I have no idea what that is but set screws in the side are real handy.
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline bubby

  • Member
  • Posts: 11,054
Re: where would i find a choked pressure flaker?
« Reply #2 on: May 22, 2015, 06:18:21 pm »
Check out shinbone 500 on YouTube i think he has a video on what you want, flintknapper jimmy too
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Tower

  • Member
  • Posts: 2,298
Re: where would i find a choked pressure flaker?
« Reply #3 on: May 23, 2015, 08:49:06 am »
I had one built like a pinvise once. I lost it :(
Logged
He who sacrifices freedom for a security deserves neither one.  Benjamin Franklin!

Offline Tracker0721

  • Member
  • Posts: 736
Re: where would i find a choked pressure flaker?
« Reply #4 on: May 24, 2015, 11:54:39 am »
Ordered mine off some flint knappers supply website. Have one end super fine, the other just normal so I just loosen the screw with the Allen wrench(built in the handle) then swap ends and tighten. Fast, easy, simple.
Logged
May my presence go unnoticed, may my shot be true, may the blood trail be short. Amen.

Offline beartail

  • Member
  • Posts: 162
Re: where would i find a choked pressure flaker?
« Reply #5 on: May 25, 2015, 09:48:56 am »
the one I seen was like you pull down on the choke slidthe wire up then pushed the choke back down and it locked. or maby it screwed out like a brace and bit and ya screwed it back tight.
Logged

Offline turbo

  • Member
  • Posts: 130
Re: where would i find a choked pressure flaker?
« Reply #6 on: May 25, 2015, 11:25:45 am »
Quote from: beartail on May 25, 2015, 09:48:56 am
the one I seen was like you pull down on the choke slidthe wire up then pushed the choke back down and it locked. or maby it screwed out like a brace and bit and ya screwed it back tight.

Flintknappingtools.com sells a 'twist lock' pressure flaker. Not sure if it's what you are talking about but you can find it here:
« Last Edit: May 26, 2015, 05:54:09 am by cowboy »
Logged

Offline Knapper

  • Member
  • Posts: 1,057
  • David Atnip
Re: where would i find a choked pressure flaker?
« Reply #7 on: May 26, 2015, 11:48:31 am »
Don't know about a choke flaker but I got one that was strangled once >:D Then thrown across the shop! :o
knapper
Logged
Ad Dare Servire
PM104250

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: where would i find a choked pressure flaker?
« Reply #8 on: May 26, 2015, 12:11:29 pm »
 ;D ;D :o
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: where would i find a choked pressure flaker?
« Reply #9 on: May 27, 2015, 08:26:47 am »
I think the "choke" you're talking about is called a "pin vice".  It works similar to a drill chuck and hold various diameter wire, pins, etc.

---http://www.traditionalwoodworker.com/Pin-Vise-with-Precision-Chuck/productinfo/500-51164/
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: where would i find a choked pressure flaker?
« Reply #10 on: May 27, 2015, 09:47:48 am »
I built a new one on Sunday. I used a section of old tent pole, and a section of copper tubing. I soldered more tubing around the first piece, drilled and tapped it. Then soldered the copper into the tent pole. I'll throw a picture up when I get home.
Logged
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: where would i find a choked pressure flaker?
« Reply #11 on: May 27, 2015, 06:38:06 pm »
Here is the one I made. I have also need larger ones (Ishi sticks) that are about 1 1/2 diameter.
Logged
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.
Pages: [1]
« previous next »