« previous next »
Pages: [1]

Author Topic: Osage bendy handle recurve  (Read 3815 times)

0 Members and 2 Guests are viewing this topic.

Offline Mo_coon-catcher

  • Member
  • Posts: 1,347
Osage bendy handle recurve
« on: May 10, 2015, 03:56:18 pm »
Finally got around to finishing a recurve a couple weeks back. It's a little on the long side for the draw length it was intended for. I will say that the 90 degree hooks were a bit of a pain to get aligned but now that it's shooting I feel it was worth it. It's 60" in a straight line between the nocks. The string bridges and and tip overlays are black cherry. I never measured the initial reflex before tillering but I think it took 1/4" or less of set and takes about 1/8" of string follow after 2 hours of shooting. Which the unbraced picture is it immediately after unstringing. It draws 45#@27". The handle is built up with cork and wrapped in raccoon leather. It seems pretty quick pushing a 450gr arrow a little under 200 yards. But lookng at the full draw I feel that it could be pulled back a few more inches comfortably.

Thanks for looking,
Kyle
Logged

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Osage bendy handle recurve
« Reply #1 on: May 10, 2015, 04:44:12 pm »
Kyle,
Nice job on the hooks, but the pic's are a little small to see any detail.

My experience with big hooks is that if the string is not lifting off of the limb at full draw you have some extra weight on the tips that is not working for you. 

Did you use dry heat or steam?......
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline Mo_coon-catcher

  • Member
  • Posts: 1,347
Re: Osage bendy handle recurve
« Reply #2 on: May 10, 2015, 04:49:01 pm »
Here's the pics a little bigger. I steamed them in. I mostly wanted to play with how far I could get them to go. I think I need to draw it back about 30" to get full use out of the hooks and the bows length.
Logged

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Osage bendy handle recurve
« Reply #3 on: May 10, 2015, 04:52:59 pm »
Yep....good work though..
Next time you just need to refine your design some for the draw your looking for.
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline half eye

  • Member
  • Posts: 3,300
Re: Osage bendy handle recurve
« Reply #4 on: May 10, 2015, 05:13:43 pm »
Very nicely done,
Logged

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: Osage bendy handle recurve
« Reply #5 on: May 10, 2015, 06:24:29 pm »
Those are some mean looking hooks, the bend looks good too, nice bow.
Logged
I ain't broke but I'm badly bent.

Offline PAHunter

  • Member
  • Posts: 677
  • "If your not having fun, what's the point?" - Khan
    • Victory Before Combat (My YouTube Page)
Re: Osage bendy handle recurve
« Reply #6 on: May 10, 2015, 09:35:45 pm »
Looks good!  IMO a littler under 200 yards for a 45 pound selfbow is VERY fast.
Logged
Thanks,
Rob - Wexford, PA

"Give me six hours to chop down a tree and I will spend the first four sharpening the axe". - Abe Lincoln

blackhawk

  • Guest
Re: Osage bendy handle recurve
« Reply #7 on: May 11, 2015, 08:49:41 am »
Yank that thing back a few more inches..it has the room to do so,n will prob fling a serious arrow.
Logged

Offline Onebowonder

  • Member
  • Posts: 1,495
Re: Osage bendy handle recurve
« Reply #8 on: May 11, 2015, 01:18:13 pm »
Love this bow!

OneBow
Logged

Offline Mo_coon-catcher

  • Member
  • Posts: 1,347
Re: Osage bendy handle recurve
« Reply #9 on: May 11, 2015, 03:15:38 pm »
Thanks for the comments everyone. When I get some time I ll grab that arrow and pull it back to about 30" and see what it can do. the guy I made the bow for backed out since he was moving to Iowa for a job. So I'm going to play with it and see why it can do. There are just two thing I'm worried about with drawing this bow back much further. A hole and a big knot. Both at the edge of a limb. I soaked yen in super glue several times to help them hold.

Kyle
Logged

Offline Arrowind

  • Member
  • Posts: 1,428
Re: Osage bendy handle recurve
« Reply #10 on: May 11, 2015, 05:03:14 pm »
Looks good.  Well done.
Logged
Talking trees. What do trees have to talk about, hmm... except the consistency of squirrel droppings?

Offline Peacebow_Coos

  • Member
  • Posts: 811
Re: Osage bendy handle recurve
« Reply #11 on: May 11, 2015, 10:15:54 pm »
Beautiful work man
Logged

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: Osage bendy handle recurve
« Reply #12 on: May 12, 2015, 09:11:15 am »
I like those hooks.  Good looking tiller too
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Osage bendy handle recurve
« Reply #13 on: May 12, 2015, 09:36:17 am »
It's a beauty! Nicely done. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!
Pages: [1]
« previous next »