« previous next »
Pages: [1] 2

Author Topic: easy way to taper board bows with diy jigs ?  (Read 7983 times)

0 Members and 2 Guests are viewing this topic.

Offline bow-noob

  • Member
  • Posts: 25
easy way to taper board bows with diy jigs ?
« on: March 09, 2015, 02:20:30 pm »
Hi, I am looking for a way to cut as close as possible or sand tapers in 1x2 board bows as fast as possible considering i would also not like to spend to much on a setup.

Does anyone have an ideas or plans about good ways to pretaper limbs of dimension lumber ?

Thanks
Logged

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: easy way to taper board bows with diy jigs ?
« Reply #1 on: March 09, 2015, 02:22:03 pm »
Make a lam grinder or a table saw rig
Logged
Nothing ventured nothing gained

Offline bow-noob

  • Member
  • Posts: 25
Re: easy way to taper board bows with diy jigs ?
« Reply #2 on: March 09, 2015, 02:28:14 pm »
I have tried to make a table saw one and it's been a struggle, is there a commerical made jig you can buy ?
Logged

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: easy way to taper board bows with diy jigs ?
« Reply #3 on: March 09, 2015, 02:44:13 pm »
I just draw my taper on the edge of the board and run it though the table saw fee hand then clean it up with a rasp. I plan on making a table saw jig. It will run in the groove and the board will camp against a pre tapered block.
Logged
Nothing ventured nothing gained

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: easy way to taper board bows with diy jigs ?
« Reply #4 on: March 09, 2015, 02:54:15 pm »
Why in such a hurry to mass produce noob?
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline RyanY

  • Member
  • Posts: 1,999
Re: easy way to taper board bows with diy jigs ?
« Reply #5 on: March 09, 2015, 03:05:28 pm »
Quote from: PEARL DRUMS on March 09, 2015, 02:54:15 pm
Why in such a hurry to mass produce noob?

+1
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: easy way to taper board bows with diy jigs ?
« Reply #6 on: March 09, 2015, 03:07:50 pm »
The fun is in the journey noobie, enjoy the ride ;)
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bow-noob

  • Member
  • Posts: 25
Re: easy way to taper board bows with diy jigs ?
« Reply #7 on: March 09, 2015, 03:15:09 pm »
If anyone has an plans as requested that would be great. Thanks everyone.  I am looking at building one these sander thicknessers ( https://www.youtube.com/watch?v=Nzd34fH8frQ) for the lams anyways but not sure if it is the best option for the 1x2 into tapered limbs.

This is my journey ! It might not be the one you take or the one you suggest, that's why we all have our own journeys.  i was just hoping for some help with specific needs, to taper board bows with the best DIY jig.
Logged

Offline bow101

  • Member
  • Posts: 2,235
Re: easy way to taper board bows with diy jigs ?
« Reply #8 on: March 09, 2015, 03:17:04 pm »
Have a template then Use a hand plane and finish with a disk sander or belt sander.
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline bow-noob

  • Member
  • Posts: 25
Re: easy way to taper board bows with diy jigs ?
« Reply #9 on: March 09, 2015, 03:21:33 pm »

Quote from: bow101 on March 09, 2015, 03:17:04 pm
Have a template then Use a hand plane and finish with a disk sander or belt sander.

I am trying to avoid hand planning and instead looking for something more like the thickness sander thing i posted above, will cut out the rough tapers on a bandsaw, just wondering if there is a better solution for lumber bows as those plans seem to be more about lams and thinner cores.

What kind of table saw setups do people have ?
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: easy way to taper board bows with diy jigs ?
« Reply #10 on: March 09, 2015, 03:24:27 pm »
Call Rudder Bows. They pump out boards all day. They may divulge a secret to mass production.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline bow-noob

  • Member
  • Posts: 25
Re: easy way to taper board bows with diy jigs ?
« Reply #11 on: March 09, 2015, 03:36:20 pm »
 :)
« Last Edit: March 09, 2015, 03:39:56 pm by bow-noob »
Logged

Offline missilemaster

  • Member
  • Posts: 1,172
Re: easy way to taper board bows with diy jigs ?
« Reply #12 on: March 09, 2015, 03:54:51 pm »
How long have you been building bows? I would suggest a taper sled with a bandsaw then put then on a horizontal taper sled through a drum sander. Are you trying to build them for yourself?
Logged
All men die,  few men ever really live.

Real men love Jesus.

Offline bubby

  • Member
  • Posts: 11,054
Re: easy way to taper board bows with diy jigs ?
« Reply #13 on: March 09, 2015, 04:01:50 pm »
What kind of bow are we talking about, if it's a pyramid check out my build a long, easy board bow in the how to section, i use a tablesaw in it
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline PatM

  • Member
  • Posts: 6,737
Re: easy way to taper board bows with diy jigs ?
« Reply #14 on: March 09, 2015, 04:15:32 pm »
CNC  machine ftw.
Logged
Pages: [1] 2
« previous next »