Author Topic: rock id please  (Read 3564 times)

0 Members and 1 Guest are viewing this topic.

Offline dmathis992

  • Member
  • Posts: 26
rock id please
« on: February 22, 2015, 02:41:49 pm »
Ok this rock is extremely hard almost like a glassy texture to it. any info is appreciated.

Offline Chippintuff

  • Member
  • Posts: 777
Re: rock id please
« Reply #1 on: February 22, 2015, 03:19:23 pm »
Where did it come from? Can you give a couple high def. photos of it with good detail?

WA

Offline dmathis992

  • Member
  • Posts: 26
Re: rock id please
« Reply #2 on: February 22, 2015, 03:28:29 pm »
It came from a nearby creek bed . In Jefferson city Missouri if that helps.

Offline dmathis992

  • Member
  • Posts: 26
Re: rock id please
« Reply #3 on: February 22, 2015, 03:30:30 pm »
hers another.

Offline dmathis992

  • Member
  • Posts: 26
Re: rock id please
« Reply #4 on: February 22, 2015, 03:31:48 pm »
You can see where I've taken a few flakes off but developed ridges.

Offline stickbender

  • Member
  • Posts: 3,828
Re: rock id please
« Reply #5 on: February 22, 2015, 03:34:10 pm »

     Well that pretty much rules out Obsidian. ;)  It could be the black Noviculite, which demands high prices from the Arkansas stone manufactures.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: rock id please
« Reply #6 on: February 22, 2015, 06:12:46 pm »
I don't know but like what I see where you took the flakes off.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Dalton Knapper

  • Member
  • Posts: 339
Re: rock id please
« Reply #7 on: February 22, 2015, 06:17:20 pm »
I am not sure geoloigically where it exists. I know there is nome in North Arkansas, so I will guess Pitkin Chert. If you break off a healthy flake, smell it and it smells sulphurous, or like burnt motor oil, that would confirm the guess.

Offline dmathis992

  • Member
  • Posts: 26
Re: rock id please
« Reply #8 on: February 22, 2015, 07:10:27 pm »
ok cool ill check it in a while but I found a lot of it but very small pieces all extremely straight without any type of knapping. After I took a flake off I wanted to get an I'd and keep it for examples to find larger pieces

Offline TRACY

  • Member
  • Posts: 4,523
Re: rock id please
« Reply #9 on: February 22, 2015, 08:25:09 pm »
Looks like a chunk of slag from glass furnace. Are you downstream or near any industrial sites? I'm with mullet, flakes look good, get more and make some points.

Tracy
It is what it is - make the most of it!    PN500956

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: rock id please
« Reply #10 on: February 22, 2015, 08:42:39 pm »
The cortex does look melted and has air bubbles.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline dmathis992

  • Member
  • Posts: 26
Re: rock id please
« Reply #11 on: February 22, 2015, 09:16:23 pm »
No industrial sites that I am aware of but it's possible. I'll post some pics after I finish one.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: rock id please
« Reply #12 on: February 22, 2015, 10:28:01 pm »
It could have been dumped.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline StevenT

  • Member
  • Posts: 612
Re: rock id please
« Reply #13 on: February 23, 2015, 10:12:50 am »
Slag was my first thought also, but I am way down on the food chain when it comes to identifying rock.

Offline Dalton Knapper

  • Member
  • Posts: 339
Probably Slag
« Reply #14 on: February 23, 2015, 11:41:01 am »
This post has been edited for reasons of getting the place's name wrong! No need for me to provide the wrong information!
« Last Edit: February 23, 2015, 05:58:37 pm by Dalton Knapper »